10 material differences · fewer than 12
Tractor oneRenault 1151-41974–1976No measured PTO figureTractor twoSAME Buffalo 120 (DT)1974–1977No measured PTO figure
Which should you choose?
Read our verdict on the 1151-4 and the Buffalo 120 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 1151-4 | Buffalo 120 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 113.5 hp | 113.5 hp | — |
| Engine declared | MWM D 226-6 | SAME DA 040-1056 | differs |
| Displacement declared | 6.23 L | 6.24 L | — |
| Maximum torque declared | 275 lb·ft · 373 N·m | 308 lb·ft · 417 N·m | +12% Buffalo 120 (DT) |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | Dry LuK double clutch | Pedal operated dry Borg & Beck single plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 8.7 gpm · 33.1 L/min | 7.9 gpm · 30.0 L/min | +10% 1151-4 |
| Pressure declared | 2,321 psi · 160 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 10,362 lb · 4,700 kg | 9,700 lb · 4,400 kg | +7% 1151-4 |
| Wheelbase declared | 105.6 in · 2,683 mm | 104.7 in · 2,660 mm | — |
| Length declared | 173.2 in · 4,400 mm | 156.7 in · 3,980 mm | +11% 1151-4 |
| Width declared | 79.5–96.7 in · 2,020–2,455 mm | 85.4–113.0 in · 2,170–2,870 mm | differs |
| Ground clearance declared | 18.9 in · 480 mm | 20.9 in · 530 mm | +10% Buffalo 120 (DT) |
| Turning radius, braked declared | 21.3 ft · 6.48 m | 13.5 ft · 4.10 m | +58% 1151-4 |
| Fuel tank declared | 123.6 qt · 117.0 L | 132.1 qt · 125.0 L | +7% Buffalo 120 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Renault 1151-4 sources
- Source: Traktorenlexikon, “Renault 1151-4 R7674”
- Source: Traktorenlexikon, “Fendt Favorit 612 S”
SAME Buffalo 120 (DT) sources
- Source: Traktorenlexikon, “SAME Buffalo 120”