7 material differences · fewer than 12
Tractor oneNuffield 3/45 (345)1967–1969No measured PTO figureTractor twoSOMECA 470 (TD)1980No measured PTO figure
Which should you choose?
Read our verdict on the 3/45 (345) and the 470 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 3/45 (345) | 470 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 44.9 hp | 45.3 hp | — |
| Engine declared | BMC 28 TD | FIAT-IVECO 8035.01.320 | differs |
| Displacement declared | 2.83 L | 2.34 L | +21% 3/45 (345) |
| Maximum torque declared | 117 lb·ft · 158 N·m | — | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | — | Pedal-operated two-stage dry FEREDO double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 8.2 gpm · 31.0 L/min | 5.6 gpm · 21.2 L/min | +46% 3/45 (345) |
| Pressure declared | — | 2,843 psi · 196 bar | — |
| Rear PTO speeds declared | 540 rpm | 540 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,159 lb · 2,340 kg | 3,120 lb · 1,415 kg | +65% 3/45 (345) |
| Wheelbase declared | 75.0 in · 1,905 mm | 73.4 in · 1,865 mm | — |
| Length declared | 120.1 in · 3,050 mm | 124.0 in · 3,150 mm | — |
| Width declared | 71.7 in · 1,820 mm | 48.0 in · 1,220 mm | +49% 3/45 (345) |
| Ground clearance declared | 16.1 in · 409 mm | 14.6 in · 370 mm | +11% 3/45 (345) |
| Turning radius, braked declared | 10.8 ft · 3.30 m | — | — |
| Fuel tank declared | 76.8 qt · 72.7 L | 57.1 qt · 54.0 L | +35% 3/45 (345) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Nuffield 3/45 (345) sources
- Source: Traktorenlexikon, “Nuffield 3/45 (1967-1969)”
SOMECA 470 (TD) sources
- Source: Traktorenlexikon, “Someca 470 V”