8 material differences · fewer than 12
Tractor oneNew Holland TN 95 DA2006–2007No measured PTO figureTractor twoURSUS 10441997–1999No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (59%); the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (2006–2007; 1997–1999). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | TN 95 DA | 1044 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 89 hp | 89 hp | — |
| Engine declared | — | URSUS T-4390 | — |
| Displacement declared | — | 3.86 L | — |
| Maximum torque declared | 268 lb·ft · 364 N·m | 249 lb·ft · 338 N·m | +8% TN 95 DA |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6 mph · 30 km/h | +33% TN 95 DA |
| Clutch declared | Oil-immersed multi-plate clutch with six plates of 113 mm diameter | Pedal-operated, dry hydraulic ZTS-MARTIN single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic control declared | Constant flow | — | — |
| Pump flow declared | 12.5 gpm · 47.4 L/min | — | — |
| Pressure declared | — | 2,828 psi · 195 bar | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,724 lb · 3,050 kg | 10,692 lb · 4,850 kg | +59% 1044 |
| Wheelbase declared | 86.0 in · 2,185 mm | 95.9 in · 2,435 mm | +11% 1044 |
| Length declared | 140.5 in · 3,568 mm | 164.8 in · 4,185 mm | +17% 1044 |
| Width declared | 79.1 in · 2,010 mm | 82.2 in · 2,087 mm | — |
| Ground clearance declared | 14.2 in · 360 mm | 15.0 in · 382 mm | +6% 1044 |
| Turning radius, braked declared | — | 15.7 ft · 4.78 m | — |
| Fuel tank declared | 93.0 qt · 88 L | 137.4 qt · 130.0 L | +48% 1044 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
New Holland TN 95 DA sources
- Source: Traktorenlexikon, “New Holland TN95 DA”
- Source: OECD test report 2346, 2006
URSUS 1044 sources
- Source: Wikipedia (pl): Ursus 1044 (open data)
- Source: Traktorenlexikon, “Ursus 1042/1044”