11 material differences · fewer than 12
Tractor oneNew Holland TN 70 DA/SA2003–2008No measured PTO figureTractor twoSAME Dorado 75 (DT)2000–2004No measured PTO figure
Which should you choose?
Read our verdict on the TN 70 DA/SA and the Dorado 75 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | TN 70 DA/SA | Dorado 75 (DT) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 71 hp | 71 hp | — |
| Engine declared | IVECO 8045.05 | SAME-DEUTZ-FAHR 1000.4 A 5 | differs |
| Displacement declared | 2.93 L | 4.00 L | +37% Dorado 75 (DT) |
| Maximum torque declared | 192 lb·ft · 260 N·m | 204 lb·ft · 276 N·m | +6% Dorado 75 (DT) |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Dry LuK double clutch | Pedal-operated dry S.D.F. single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 12.4 gpm · 47.0 L/min | — | — |
| Pressure declared | — | 2,176 psi · 150 bar | — |
| Rear PTO speeds declared | 540/540E/1000 rpm | 540/540E rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,020 lb · 2,277 kg | 5,864 lb · 2,660 kg | +17% Dorado 75 (DT) |
| Maximum permissible mass declared | — | 11,023 lb · 5,000 kg | — |
| Wheelbase declared | 81.5 in · 2,070 mm | 88.0 in · 2,235 mm | +8% Dorado 75 (DT) |
| Length declared | 141.8 in · 3,601 mm | 151.6 in · 3,850 mm | +7% Dorado 75 (DT) |
| Width declared | 73.5–95.6 in · 1,867–2,428 mm | 75.6–91.3 in · 1,920–2,320 mm | — |
| Ground clearance declared | 13.9 in · 353 mm | 17.5 in · 445 mm | +26% Dorado 75 (DT) |
| Turning radius, braked declared | — | 10.5 ft · 3.20 m | — |
| Fuel tank declared | 56.0 qt · 53.0 L | 95.1 qt · 90.0 L | +70% Dorado 75 (DT) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
New Holland TN 70 DA/SA sources
- Source: Traktorenlexikon, “New Holland TN70 DA/SA”
SAME Dorado 75 (DT) sources
- Source: Traktorenlexikon, “SAME Dorado 75”
- Source: Traktorenlexikon, “SAME Dorado 70”