New Holland TN 60 DA/SA vs VALMET 600

12 material differences

Tractor one

2003–2008

No measured PTO figure

Tractor two

1997–2002

No measured PTO figure

Which should you choose?

Read our verdict on the TN 60 DA/SA and the 600 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

12 material differences · 4 fields identical or within 5%, which is not counted as material

New Holland TN 60 DA/SA and VALMET 600, field by field
Field	TN 60 DA/SA	600	Gap
Engine
Engine power, claimed claimed	58.2 hp	59.1 hp	—
Engine declared	IVECO 8035.05 C	VALMET 320 D	differs
Displacement declared	2.93 L	3.30 L	+13% 600
Maximum torque declared	146 lb·ft · 198 N·m	162 lb·ft · 220 N·m	+11% 600
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	dry LuK double clutch, pedal-operated driving clutch	Dry LuK double clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Constant flow	—
Pump flow declared	12.4 gpm · 47.0 L/min	14.7 gpm · 55.7 L/min	+19% 600
Pressure declared	—	2,901 psi · 200 bar	—
Three-point lift at ends declared	5,368 lb · 2,435 kg	6,294 lb · 2,855 kg	+17% 600
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	5,214 lb · 2,365 kg	6,900 lb · 3,130 kg	+32% 600
Wheelbase declared	81.5 in · 2,070 mm	83.1 in · 2,112 mm	—
Length declared	141.8 in · 3,601 mm	147.4 in · 3,745 mm	—
Width declared	73.5 in · 1,867 mm	84.2 in · 2,139 mm	+15% 600
Height declared	97.5 in · 2,476 mm	104.7 in · 2,660 mm	+7% 600
Ground clearance declared	13.9 in · 353 mm	19.9 in · 505 mm	+43% 600
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	56.0 qt · 53.0 L	83.5 qt · 79.0 L	+49% 600

Source

Source