New Holland TLA 90 (A) or VALMET 6350 HiTech?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the TLA 90 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6350 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The VALMET 6350 HiTech suits loader and hydraulic implement work better on this data: 12% (7.6 L/min / 2.0 gpm) more hydraulic flow.
- The VALMET 6350 HiTech suits road haulage better on this data: 50% (3,000 kg / 6,614 lb) more maximum permissible mass.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | TLA 90 (A) | 6350 HiTech | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 66.9 kW (89.7 hp)Traktorenlexikon, “New Holland TL 90 A (2004-2008)” | 66.2 kW (88.8 hp)Traktorenlexikon, “Valmet 6350 HiTech” | Not comparableNot comparable on power at the PTO shaft: the TLA 90 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6350 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the TLA 90 (A) and the 6350 HiTech. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the TLA 90 (A) and the 6350 HiTech. |
| Which pumps more oil for implements? | 62.4 L/min (16.5 gpm)Traktorenlexikon, “New Holland TL 90 A (2004-2008)” | 70.0 L/min (18.5 gpm)Traktorenlexikon, “Valmet 6350 HiTech” | AheadThe VALMET 6350 HiTech has 12% more hydraulic flow (7.6 L/min / 2.0 gpm) than the New Holland TLA 90 (A) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 3,947 kg (8,702 lb)Traktorenlexikon, “New Holland TL 90 A (2004-2008)” | 5,600 kg (12,346 lb)Traktorenlexikon, “Valmet 6350 HiTech” | Not comparableNot comparable on three-point lift: the TLA 90 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland TL 90 A (2004-2008)”); the 6350 HiTech: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 6350 HiTech”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 3,925 kg (8,653 lb)Traktorenlexikon, “New Holland TL 90 A (2004-2008)” | 4,770 kg (10,516 lb)Traktorenlexikon, “Valmet 6350 HiTech” | Ahead (a fact, not an advantage)The VALMET 6350 HiTech is 22% heavier (845 kg / 1,863 lb) than the New Holland TLA 90 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 6,000 kg (13,228 lb)Traktorenlexikon, “New Holland TL 90 A (2004-2008)” | 9,000 kg (19,842 lb)Traktorenlexikon, “Valmet 6350 HiTech” | AheadThe VALMET 6350 HiTech has 50% higher maximum permissible mass (3,000 kg / 6,614 lb) than the New Holland TLA 90 (A) (both maximum permissible mass, as stated by the source). |
| Which has the wider choice of gears? | 12 to 24Traktorenlexikon, “New Holland TL 90 A (2004-2008)” | 36Traktorenlexikon, “Valmet 6350 HiTech” | AheadThe VALMET 6350 HiTech has 50% more forward gears (12 gears) than the New Holland TLA 90 (A) (both forward gears, as stated by the source). |
| Which offers a creeper range? | YesTraktorenlexikon, “New Holland TL 90 A (2004-2008)” | — | No figureNo call on a creeper range: not stated for the 6350 HiTech. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TL 90 A (2004-2008)” | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Valmet 6350 HiTech” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/540E/1000 rpmTraktorenlexikon, “New Holland TL 90 A (2004-2008)” | 540/1000 rpmTraktorenlexikon, “Valmet 6350 HiTech” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “New Holland TL 90 A (2004-2008)” | independentTraktorenlexikon, “Valmet 6350 HiTech” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “New Holland TL 90 A (2004-2008)” | 4WDTraktorenlexikon, “Valmet 6350 HiTech” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 2004–2008 | 1999–2006 | Ahead (a fact, not an advantage)The New Holland TLA 90 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The VALMET 6350 HiTech has 12% more hydraulic flow (7.6 L/min / 2.0 gpm) than the New Holland TLA 90 (A) (both pump flow, as stated by the source).
- The VALMET 6350 HiTech is 22% heavier (845 kg / 1,863 lb) than the New Holland TLA 90 (A) (both unladen weight, as stated by the source).
- The VALMET 6350 HiTech has 50% higher maximum permissible mass (3,000 kg / 6,614 lb) than the New Holland TLA 90 (A) (both maximum permissible mass, as stated by the source).
- The VALMET 6350 HiTech has 50% more forward gears (12 gears) than the New Holland TLA 90 (A) (both forward gears, as stated by the source).
- The New Holland TLA 90 (A) is newer: production began 5 years later. We hold no parts-availability data, so there is no call on parts.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the TLA 90 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6350 HiTech has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- Not comparable on three-point lift: the TLA 90 (A): lift through the full range at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland TL 90 A (2004-2008)”); the 6350 HiTech: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Valmet 6350 HiTech”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources