New Holland TLA 80 (A) or Renault Ceres 335?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the TLA 80 (A): power at the PTO, claimed (Traktorenlexikon, “New Holland TL 80 A (2004-2008)”); the Ceres 335: power at the PTO, measured by a laboratory at maximum power (OECD Test 1969) — not the same quantity, basis and condition.

  • The New Holland TLA 80 (A) suits loader and hydraulic implement work better on this data: 22% (11.3 L/min / 3.0 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for New Holland TLA 80 (A) and Renault Ceres 335, with the call on each
QuestionTLA 80 (A)Ceres 335Call
Which puts more power through the PTO shaft?53.9 kW (72.3 hp)Traktorenlexikon, “New Holland TL 80 A (2004-2008)”53.5 kW (71.7 hp)OECD Test 1969Not comparableNot comparable on power at the PTO shaft: the TLA 80 (A): power at the PTO, claimed (Traktorenlexikon, “New Holland TL 80 A (2004-2008)”); the Ceres 335: power at the PTO, measured by a laboratory at maximum power (OECD Test 1969) — not the same quantity, basis and condition.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the TLA 80 (A) and the Ceres 335.
Which pulls harder at the drawbar?45.4 kW (60.9 hp)OECD Test 1969No figureNo call on drawbar power: no figure on record for the TLA 80 (A).
Which pumps more oil for implements?62.4 L/min (16.5 gpm)Traktorenlexikon, “New Holland TL 80 A (2004-2008)”51.1 L/min (13.5 gpm)Traktorenlexikon, “Renault Ceres 335”AheadThe New Holland TLA 80 (A) has 22% more hydraulic flow (11.3 L/min / 3.0 gpm) than the Renault Ceres 335 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?4,110 kg (9,061 lb)Traktorenlexikon, “Renault Ceres 335”No figureNo call on three-point lift: no figure on record for the TLA 80 (A).
Which is heavier, for traction?3,840 kg (8,466 lb)Traktorenlexikon, “New Holland TL 80 A (2004-2008)”3,680 kg (8,113 lb) to 3,760 kg (8,289 lb), varies by configurationTraktorenlexikon, “Renault Ceres 335”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?5,500 kg (12,125 lb)Traktorenlexikon, “New Holland TL 80 A (2004-2008)”5,860 kg (12,919 lb)Traktorenlexikon, “Renault Ceres 335”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?12 to 24Traktorenlexikon, “New Holland TL 80 A (2004-2008)”18OECD test report 1969, 2001Sources disagreeNo call on forward gears: sources disagree on the figure for the Ceres 335.
Which offers a creeper range?YesTraktorenlexikon, “New Holland TL 80 A (2004-2008)”No figureNo call on a creeper range: not stated for the Ceres 335.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland TL 80 A (2004-2008)”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault Ceres 335”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/540E/1000 rpmTraktorenlexikon, “New Holland TL 80 A (2004-2008)”540/1000 rpmOECD test report 1978, 2002EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “New Holland TL 80 A (2004-2008)”No figureNo call on PTO independence: not stated for the Ceres 335.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “New Holland TL 80 A (2004-2008)”4WDOECD test report 1969, 2001; OECD test report 1978, 2002; Traktorenlexikon, “Renault Ceres 335”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2004–20082000–2004EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland TLA 80 (A) has 22% more hydraulic flow (11.3 L/min / 3.0 gpm) than the Renault Ceres 335 (both pump flow, as stated by the source).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the TLA 80 (A): power at the PTO, claimed (Traktorenlexikon, “New Holland TL 80 A (2004-2008)”); the Ceres 335: power at the PTO, measured by a laboratory at maximum power (OECD Test 1969) — not the same quantity, basis and condition.
  • No call on forward gears: sources disagree on the figure for the Ceres 335.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources