11 material differences · fewer than 12

Tractor oneNew Holland TL 100 (A)1998–2004No measured PTO figureTractor twoZETOR 96411999–2002No measured PTO figure

Which should you choose?

Read our verdict on the TL 100 (A) and the 9641 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 5 fields identical or within 5%, which is not counted as material

New Holland TL 100 (A) and ZETOR 9641, field by field
Field	TL 100 (A)	9641	Gap
Engine
Engine power, claimed claimed	93.7 hp	93.7 hp	—
Engine declared	Iveco 8045.25 K	SDF Z-1300	differs
Displacement declared	3.91 L	4.16 L	+6% 9641
Maximum torque declared	245 lb·ft · 332 N·m	254 lb·ft · 344 N·m	—
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	—	Pedal-operated, dry Zetor single-disc clutch	—
Hydraulics & hitch
Pump flow declared	15.9 gpm · 60.0 L/min	15.3 gpm · 58.0 L/min	—
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift, at the coupling points declared	8,554 lb · 3,880 kg	12,434 lb · 5,640 kg	+45% 9641
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,300 lb · 3,765 kg	9,766 lb · 4,430 kg	+18% 9641
Maximum permissible mass declared	13,228 lb · 6,000 kg	14,771 lb · 6,700 kg	+12% 9641
Wheelbase declared	92.2 in · 2,342 mm	94.0 in · 2,388 mm	—
Length declared	174.4 in · 4,430 mm	189.6 in · 4,815 mm	+9% 9641
Width declared	79.1–105.7 in · 2,009–2,684 mm	85.2–91.1 in · 2,165–2,315 mm	differs
Height, over the cab declared	100.4 in · 2,550 mm	106.9 in · 2,715 mm	+6% 9641
Ground clearance declared	17.3 in · 440 mm	14.3 in · 362 mm	+22% TL 100 (A)
Turning radius, braked declared	12.0 ft · 3.65 m	—	—
Fuel tank declared	121.5 qt · 115.0 L	190.2 qt · 180.0 L	+57% 9641

Source

Source