10 material differences · fewer than 12
Tractor oneNew Holland TD 75 D (A)2002–2004No measured PTO figureTractor twoNew Holland TN 70 DA/SA2003–2008No measured PTO figure
Which should you choose?
Read our verdict on the TD 75 D (A) and the TN 70 DA/SA → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | TD 75 D (A) | TN 70 DA/SA | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 72.0 hp | 71 hp | — |
| Engine declared | IVECO 8045.06-406 | IVECO 8045.05 | differs |
| Displacement declared | 3.61 L | 2.93 L | +23% TD 75 D (A) |
| Maximum torque declared | 153 lb·ft · 208 N·m | 192 lb·ft · 260 N·m | +25% TN 70 DA/SA |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Dry LuK double clutch | Dry LuK double clutch | — |
| Hydraulics & hitch | |||
| Pump flow declared | 11.9 gpm · 45.2 L/min | 12.4 gpm · 47.0 L/min | — |
| Pressure declared | 3,553 psi · 245 bar | — | — |
| Three-point lift, at the coupling points declared | 6,614 lb · 3,000 kg | 5,351 lb · 2,427 kg | +24% TD 75 D (A) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,010 lb · 2,726 kg | 5,020 lb · 2,277 kg | +20% TD 75 D (A) |
| Wheelbase declared | 90.7 in · 2,305 mm | 81.5 in · 2,070 mm | +11% TD 75 D (A) |
| Length declared | 153.0 in · 3,885 mm | 141.8 in · 3,601 mm | +8% TD 75 D (A) |
| Width declared | 75.9–95.6 in · 1,928–2,428 mm | 73.5–95.6 in · 1,867–2,428 mm | — |
| Ground clearance declared | 10.6 in · 270 mm | 13.9 in · 353 mm | +31% TN 70 DA/SA |
| Fuel tank declared | 97.2 qt · 92.0 L | 56.0 qt · 53.0 L | +74% TD 75 D (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
New Holland TD 75 D (A) sources
- Source: Traktorenlexikon, “New Holland TD 75 D”
New Holland TN 70 DA/SA sources
- Source: Traktorenlexikon, “New Holland TN70 DA/SA”