8 material differences · fewer than 12
Tractor oneNew Holland T4.75from 2011No measured PTO figureTractor twoRenault Ceres 340 (A)1998–2001No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (26%); they were not built in overlapping years (2011–2011; 1998–2001). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
8 material differences · 2 fields identical or within 5%, which is not counted as material
| Field | T4.75 | Ceres 340 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 84 hp | 83.9 hp | — |
| Engine declared | — | JOHN DEERE 4039 TRT 35 | — |
| Displacement declared | — | 3.92 L | — |
| Maximum torque declared | 206 lb·ft · 279.4 N·m | 219 lb·ft · 297 N·m | +6% Ceres 340 (A) |
| Transmission | |||
| Top speed declared | 24.9 mph · 40 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | — | Dry LuK double clutch type 310/330 | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 12.5 gpm · 47.5 L/min | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 6,173 lb · 2,800 kg | 7,793 lb · 3,535 kg | +26% Ceres 340 (A) |
| Maximum permissible mass declared | 10,582 lb · 4,800 kg | 12,644 lb · 5,735 kg | +19% Ceres 340 (A) |
| Wheelbase declared | — | 97.2 in · 2,470 mm | — |
| Length declared | 149.3 in · 3,792 mm | 168.5 in · 4,280 mm | +13% Ceres 340 (A) |
| Width declared | 76.8 in · 1,950 mm | 83.1 in · 2,110 mm | +8% Ceres 340 (A) |
| Ground clearance declared | 15.0 in · 380 mm | 19.3 in · 490 mm | +29% Ceres 340 (A) |
| Turning radius, braked declared | 12.0 ft · 3.66 m | 13.6 ft · 4.15 m | +13% Ceres 340 (A) |
| Fuel tank declared | — | 147.9 qt · 140.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
New Holland T4.75 sources
- Source: Traktorenlexikon, “New Holland T4.75”
- Source: OECD test report 2743, 2013
- Source: OECD test report 2887, 2015
- Source: OECD test report 2887, 2015
Renault Ceres 340 (A) sources
- Source: Traktorenlexikon, “Renault Ceres 340”
- Source: Traktorenlexikon, “Renault Ceres 95X”