New Holland T 8010 vs Renault Atles 926 RZ

9 material differences · fewer than 12

Tractor one

2006–2011

No measured PTO figure

Tractor two

2001–2004

No measured PTO figure

Which should you choose?

Read our verdict on the T 8010 and the Atles 926 RZ → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

New Holland T 8010 and Renault Atles 926 RZ, field by field
Field	T 8010	Atles 926 RZ	Gap
Engine
Engine power, claimed claimed	217.9 hp	223.0 hp	—
Engine declared	CUMMINS 6 TAA-8304 (TIER-III)	Deutz BF6M 1013 FC	differs
Displacement declared	8.27 L	7.15 L	+16% T 8010
Maximum torque declared	673 lb·ft · 913 N·m	619 lb·ft · 839.6 N·m	+9% T 8010
Transmission
Top speed declared	24.9–31.1 mph · 40–50 km/h	24.9 mph · 40 km/h	differs
Hydraulics & hitch
Hydraulic centre declared	—	Closed centre	—
Pump flow declared	44.0 gpm · 166.6 L/min	—	—
Pressure declared	3,336 psi · 230 bar	3,408 psi · 235 bar	—
Three-point lift at ends declared	17,046 lb · 7,732 kg	27,007 lb · 12,250 kg	+58% Atles 926 RZ
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	21,325 lb · 9,673 kg	21,363 lb · 9,690 kg	—
Maximum permissible mass declared	30,865 lb · 14,000 kg	27,227 lb · 12,350 kg	+13% T 8010
Wheelbase declared	121.2 in · 3,078 mm	119.5 in · 3,035 mm	—
Length declared	229.5 in · 5,829 mm	261.5 in · 6,641 mm	+14% Atles 926 RZ
Width declared	98.0 in · 2,490 mm	100.4 in · 2,550 mm	—
Height declared	131.1 in · 3,331 mm	125.2 in · 3,180 mm	—
Ground clearance declared	14.6 in · 372 mm	25.8 in · 655 mm	+76% Atles 926 RZ
Turning radius, braked declared	—	17.7 ft · 5.40 m	—
Fuel tank declared	720.7 qt · 682.0 L	480.8 qt · 455.0 L	+50% T 8010

Source

Source