New Holland T 6050 Delta vs VALMET Mega 8150 HiTech

9 material differences · fewer than 12

Tractor one

2007–2012

No measured PTO figure

Tractor two

1998–2004

No measured PTO figure

Which should you choose?

Read our verdict on the T 6050 Delta and the Mega 8150 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 7 fields identical or within 5%, which is not counted as material

New Holland T 6050 Delta and VALMET Mega 8150 HiTech, field by field
Field	T 6050 Delta	Mega 8150 HiTech	Gap
Engine
Engine power, claimed claimed	124.3 hp	123.2 hp	—
Engine declared	IVECO-NEF F 4 GE 9684 (TIER-III)	VALMET 620 DSRE	differs
Displacement declared	6.73 L	6.59 L	—
Maximum torque declared	435 lb·ft · 590 N·m	363 lb·ft · 492 N·m	+20% T 6050 Delta
Transmission
Top speed declared	24.9 mph · 40 km/h	24.9–31.1 mph · 40–50 km/h	differs
Hydraulics & hitch
Hydraulic control declared	Constant flow	—	—
Pump flow declared	17.1 gpm · 64.8 L/min	20.4 gpm · 77.4 L/min	+19% Mega 8150 HiTech
Pressure declared	—	3,046 psi · 210 bar	—
Three-point lift at ends declared	13,221 lb · 5,997 kg	12,972 lb · 5,884 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	11,530 lb · 5,230 kg	12,324 lb · 5,590 kg	+7% Mega 8150 HiTech
Maximum permissible mass declared	19,842 lb · 9,000 kg	19,842 lb · 9,000 kg	—
Wheelbase declared	104.4 in · 2,652 mm	100.7 in · 2,558 mm	—
Length declared	194.9 in · 4,950 mm	190.6 in · 4,840 mm	—
Width declared	89.8 in · 2,280 mm	84.8 in · 2,155 mm	+6% T 6050 Delta
Height declared	110.4 in · 2,805 mm	109.8 in · 2,790 mm	—
Ground clearance declared	18.8 in · 478 mm	17.3 in · 440 mm	+9% T 6050 Delta
Fuel tank declared	186.0 qt · 176.0 L	174.4 qt · 165.0 L	+7% T 6050 Delta

Source

Source