New Holland T-4020 or ZETOR 6321/6341 Super?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the T-4020 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6321/6341 Super has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The New Holland T-4020 suits loader and hydraulic implement work better on this data: 17% (7.5 L/min / 2.0 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for New Holland T-4020 and ZETOR 6321/6341 Super, with the call on each
QuestionT-40206321/6341 SuperCall
Which puts more power through the PTO shaft?47.8 kW (64.1 hp)Traktorenlexikon, “New Holland T 4020”47.8 kW (64.1 hp)Traktorenlexikon, “Zetor 6321/6341”Not comparableNot comparable on power at the PTO shaft: the T-4020 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6321/6341 Super has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the T-4020 and the 6321/6341 Super.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the T-4020 and the 6321/6341 Super.
Which pumps more oil for implements?52.5 L/min (13.9 gpm)Traktorenlexikon, “New Holland T 4020”45.0 L/min (11.9 gpm)Traktorenlexikon, “Zetor 6321/6341”AheadThe New Holland T-4020 has 17% more hydraulic flow (7.5 L/min / 2.0 gpm) than the ZETOR 6321/6341 Super (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,900 kg (6,393 lb)Traktorenlexikon, “New Holland T 4020”3,131 kg (6,903 lb)Traktorenlexikon, “Zetor 6321/6341”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,710 kg (8,179 lb)Traktorenlexikon, “New Holland T 4020”3,125 kg (6,889 lb)Traktorenlexikon, “Zetor 6321/6341”Ahead (a fact, not an advantage)The New Holland T-4020 is 19% heavier (585 kg / 1,290 lb) than the ZETOR 6321/6341 Super (both unladen weight, as stated by the source).
Which may carry more ballast and load?5,250 kg (11,574 lb)Traktorenlexikon, “New Holland T 4020”5,400 kg (11,905 lb)Traktorenlexikon, “Zetor 6321/6341”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?16 to 32Traktorenlexikon, “New Holland T 4020”10 to 20Traktorenlexikon, “Zetor 6321/6341”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the T-4020 and the 6321/6341 Super.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “New Holland T 4020”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Zetor 6321/6341”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “New Holland T 4020”540/1000 rpmTraktorenlexikon, “Zetor 6321/6341”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?—independentTraktorenlexikon, “Zetor 6321/6341”No figureNo call on PTO independence: not stated for the T-4020.
Which drives on both axles?4WDTraktorenlexikon, “New Holland T 4020”; OECD test report 2465, 2009; OECD test report 2466, 2009Two-wheel or four-wheel driveTraktorenlexikon, “Zetor 6321/6341”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?2008–20121997–2004Ahead (a fact, not an advantage)The New Holland T-4020 is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland T-4020 has 17% more hydraulic flow (7.5 L/min / 2.0 gpm) than the ZETOR 6321/6341 Super (both pump flow, as stated by the source).
  • The New Holland T-4020 is 19% heavier (585 kg / 1,290 lb) than the ZETOR 6321/6341 Super (both unladen weight, as stated by the source).
  • The New Holland T-4020 is newer: production began 11 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the T-4020 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 6321/6341 Super has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources