New Holland-Fiat G 170 or Steyr CVT 170?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the G 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the CVT 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | G 170 | CVT 170 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 125.1 kW (167.8 hp)Traktorenlexikon, “Fiatagri G170” | 125.1 kW (167.8 hp)Traktorenlexikon, “Steyr CVT 170” | Not comparableNot comparable on power at the PTO shaft: the G 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the CVT 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the G 170 and the CVT 170. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the G 170 and the CVT 170. |
| Which pumps more oil for implements? | 125.6 L/min (33.2 gpm)Traktorenlexikon, “Fiatagri G170” | 109.5 L/min (28.9 gpm)Traktorenlexikon, “Steyr CVT 170” | AheadThe New Holland-Fiat G 170 has 15% more hydraulic flow (16.1 L/min / 4.3 gpm) than the Steyr CVT 170 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 7,197 kg (15,867 lb)Traktorenlexikon, “Fiatagri G170” | 8,500 kg (18,739 lb)Traktorenlexikon, “Steyr CVT 170” | AheadThe Steyr CVT 170 has 18% more lift (1,303 kg / 2,873 lb) than the New Holland-Fiat G 170 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 7,622 kg (16,804 lb)Traktorenlexikon, “Fiatagri G170” | 6,270 kg (13,823 lb)Traktorenlexikon, “Steyr CVT 170” | Ahead (a fact, not an advantage)The New Holland-Fiat G 170 is 22% heavier (1,352 kg / 2,981 lb) than the Steyr CVT 170 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 11,500 kg (25,353 lb)Traktorenlexikon, “Fiatagri G170” | 11,000 kg (24,251 lb)Traktorenlexikon, “Steyr CVT 170” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 16 to 18 forwardTraktorenlexikon, “Fiatagri G170” | Stepless (CVT)Traktorenlexikon, “Steyr CVT 170” | DifferTransmissions differ in kind: the New Holland-Fiat G 170 has 16 to 18 forward gears and the Steyr CVT 170 is stepless (CVT) — not called. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the G 170 and the CVT 170. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri G170” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “Steyr CVT 170” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Fiatagri G170” | 540 rpm / 1000 rpmTraktorenlexikon, “Steyr CVT 170” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Fiatagri G170” | independentTraktorenlexikon, “Steyr CVT 170” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Fiatagri G170” | 4WDTraktorenlexikon, “Steyr CVT 170” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1993–2003 | 2000–2003 | Ahead (a fact, not an advantage)The Steyr CVT 170 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland-Fiat G 170 has 15% more hydraulic flow (16.1 L/min / 4.3 gpm) than the Steyr CVT 170 (both pump flow, as stated by the source).
- The Steyr CVT 170 has 18% more lift (1,303 kg / 2,873 lb) than the New Holland-Fiat G 170 (both lift at the hitch ends, as stated by the source).
- The New Holland-Fiat G 170 is 22% heavier (1,352 kg / 2,981 lb) than the Steyr CVT 170 (both unladen weight, as stated by the source).
- The Steyr CVT 170 is newer: production began 7 years later. We hold no parts-availability data, so there is no call on parts.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Transmissions differ in kind: the New Holland-Fiat G 170 has 16 to 18 forward gears and the Steyr CVT 170 is stepless (CVT) — not called.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the G 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the CVT 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources