New Holland-Fiat G 170 or New Holland T 7030?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the G 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 7030 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The New Holland T 7030 suits loader and hydraulic implement work better on this data: 20% (1,450 kg / 3,197 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for New Holland-Fiat G 170 and New Holland T 7030, with the call on each
QuestionG 170T 7030Call
Which puts more power through the PTO shaft?125.1 kW (167.8 hp)Traktorenlexikon, “Fiatagri G170”122.8 kW (164.7 hp)Traktorenlexikon, “New Holland T7030 Power Command”Not comparableNot comparable on power at the PTO shaft: the G 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 7030 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the G 170 and the T 7030.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the G 170 and the T 7030.
Which pumps more oil for implements?125.6 L/min (33.2 gpm)Traktorenlexikon, “Fiatagri G170”121.0 L/min (32.0 gpm)Traktorenlexikon, “New Holland T7030 Power Command”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?7,197 kg (15,867 lb)Traktorenlexikon, “Fiatagri G170”8,647 kg (19,063 lb)Traktorenlexikon, “New Holland T7030 Power Command”AheadThe New Holland T 7030 has 20% more lift (1,450 kg / 3,197 lb) than the New Holland-Fiat G 170 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?7,622 kg (16,804 lb)Traktorenlexikon, “Fiatagri G170”8,115 kg (17,891 lb)Traktorenlexikon, “New Holland T7030 Power Command”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?11,500 kg (25,353 lb)Traktorenlexikon, “Fiatagri G170”12,000 kg (26,455 lb)Traktorenlexikon, “New Holland T7030 Power Command”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?16 to 18Traktorenlexikon, “Fiatagri G170”18 to 19Traktorenlexikon, “New Holland T7030 Power Command”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the G 170 and the T 7030.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Fiatagri G170”40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “New Holland T7030 Power Command”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Fiatagri G170”540/540E/1000 rpmTraktorenlexikon, “New Holland T7030 Power Command”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Fiatagri G170”independentTraktorenlexikon, “New Holland T7030 Power Command”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Fiatagri G170”4WDTraktorenlexikon, “New Holland T7030 Power Command”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1993–20032007–2011Ahead (a fact, not an advantage)The New Holland T 7030 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The New Holland T 7030 has 20% more lift (1,450 kg / 3,197 lb) than the New Holland-Fiat G 170 (both lift at the hitch ends, as stated by the source).
  • The New Holland T 7030 is newer: production began 14 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the G 170 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 7030 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.

← Every figure for both machines, side by side, with sources