New Holland 9882 (Traktorenlexikon) or New Holland T 9030?
Which should you choose?
On performance, every comparable figure that differs favours the New Holland 9882: hydraulic flow. On features, the New Holland T 9030 is ahead on forward gears.
- The New Holland 9882 suits loader and hydraulic implement work better on this data: 20% (30.4 L/min / 8.0 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | 9882 | T 9030 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 275.8 kW (369.9 hp)Traktorenlexikon, “New Holland 9882” | 258.8 kW (347.1 hp)Traktorenlexikon, “New Holland T9030” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the 9882 and the T 9030. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the 9882 and the T 9030. |
| Which pumps more oil for implements? | 184.1 L/min (48.6 gpm)Traktorenlexikon, “New Holland 9882” | 153.7 L/min (40.6 gpm)Traktorenlexikon, “New Holland T9030” | AheadThe New Holland 9882 has 20% more hydraulic flow (30.4 L/min / 8.0 gpm) than the New Holland T 9030 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 9,170 kg (20,216 lb)Traktorenlexikon, “New Holland 9882” | 8,905 kg (19,632 lb)Traktorenlexikon, “New Holland T9030” | Not comparableNot comparable on three-point lift: the 9882: lift at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland 9882”); the T 9030: lift through the full range 610 mm behind the ends, as stated by the source (Traktorenlexikon, “New Holland T9030”) — not the same quantity, basis and condition. |
| Which is heavier, for traction? | 14,440 kg (31,835 lb)Traktorenlexikon, “New Holland 9882” | 18,951 kg (41,780 lb)Traktorenlexikon, “New Holland T9030” | Ahead (a fact, not an advantage)The New Holland T 9030 is 31% heavier (4,511 kg / 9,945 lb) than the New Holland 9882 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 19,958 kg (44,000 lb)Traktorenlexikon, “New Holland 9882” | 20,684 kg (45,600 lb)Traktorenlexikon, “New Holland T9030” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “New Holland 9882” | 16Traktorenlexikon, “New Holland T9030” | AheadThe New Holland T 9030 has 33% more forward gears (4 gears) than the New Holland 9882 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the 9882 and the T 9030. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “New Holland 9882” | 30 km/h (18.6 mph)Traktorenlexikon, “New Holland T9030” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 1000 rpmTraktorenlexikon, “New Holland 9882” | 1000 rpmTraktorenlexikon, “New Holland T9030” | EvenEven on PTO speeds: the same speeds (1000 rpm). |
| Which PTO runs independently of the ground drive? | — | independentTraktorenlexikon, “New Holland T9030” | No figureNo call on PTO independence: not stated for the 9882. |
| Which drives on both axles? | 4WDTraktorenlexikon, “New Holland 9882” | 4WDTraktorenlexikon, “New Holland T9030” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–1999 | 2007–2010 | Ahead (a fact, not an advantage)The New Holland T 9030 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland 9882 has 20% more hydraulic flow (30.4 L/min / 8.0 gpm) than the New Holland T 9030 (both pump flow, as stated by the source).
- The New Holland T 9030 is 31% heavier (4,511 kg / 9,945 lb) than the New Holland 9882 (both unladen weight, as stated by the source).
- The New Holland T 9030 has 33% more forward gears (4 gears) than the New Holland 9882 (both forward gears, as stated by the source).
- The New Holland T 9030 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on three-point lift: the 9882: lift at the hitch ends, as stated by the source (Traktorenlexikon, “New Holland 9882”); the T 9030: lift through the full range 610 mm behind the ends, as stated by the source (Traktorenlexikon, “New Holland T9030”) — not the same quantity, basis and condition.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources