6 material differences · fewer than 12
Tractor oneNew Holland 8560 A1996–1999No measured PTO figureTractor twoSAME Titan 1601991–1998No measured PTO figure
Which should you choose?
Read our verdict on the 8560 A and the Titan 160 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 7 fields identical or within 5%, which is not counted as material
| Field | 8560 A | Titan 160 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 157.8 hp | 156.8 hp | — |
| Engine declared | New Holland 675 T-WM | SAME 1000.6 ATI | differs |
| Displacement declared | 7.48 L | 6.00 L | +25% 8560 A |
| Maximum torque declared | 481 lb·ft · 652 N·m | — | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Electro-hydraulically operated, oil-immersed New Holland multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 26.0 gpm · 98.4 L/min | 15.2 gpm · 57.5 L/min | +71% 8560 A |
| Pressure declared | 2,799 psi · 193 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 13,636 lb · 6,185 kg | 13,569–14,264 lb · 6,155–6,470 kg | — |
| Maximum permissible mass declared | 20,944 lb · 9,500 kg | 18,739 lb · 8,500 kg | +12% 8560 A |
| Wheelbase declared | 107.2 in · 2,723 mm | 112.2 in · 2,850 mm | — |
| Length declared | 183.1 in · 4,650 mm | 187.0 in · 4,750 mm | — |
| Width declared | 90.9 in · 2,310 mm | 97.2 in · 2,470 mm | +7% Titan 160 |
| Ground clearance declared | 14.5 in · 369 mm | 20.3 in · 515 mm | +40% Titan 160 |
| Turning radius, braked declared | — | 17.2 ft · 5.25 m | — |
| Fuel tank declared | 232.5 qt · 220.0 L | 243.0 qt · 230.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
New Holland 8560 A sources
- Source: Traktorenlexikon, “New Holland 8560”
SAME Titan 160 sources
- Source: Traktorenlexikon, “SAME Titan 160”