7 material differences · fewer than 12
Tractor oneNew Holland 8560 A1996–1999No measured PTO figureTractor twoNew Holland TM1651999–2002No measured PTO figure
Which should you choose?
Read our verdict on the 8560 A and the TM165 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | 8560 A | TM165 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 157.8 hp | 157.8 hp | — |
| Engine declared | New Holland 675 T-WM | NEW HOLLAND 675-T/WW | differs |
| Displacement declared | 7.48 L | 7.48 L | — |
| Maximum torque declared | 481 lb·ft · 652 N·m | 487 lb·ft · 660 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Clutch declared | Electro-hydraulically operated, oil-immersed New Holland multi-disc clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 26.0 gpm · 98.4 L/min | — | — |
| Pressure declared | 2,799 psi · 193 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 13,636 lb · 6,185 kg | 13,962 lb · 6,333 kg | — |
| Maximum permissible mass declared | 20,944 lb · 9,500 kg | 23,149 lb · 10,500 kg | +11% TM165 |
| Wheelbase declared | 107.2 in · 2,723 mm | 107.2 in · 2,723 mm | — |
| Length declared | 183.1 in · 4,650 mm | 185.2 in · 4,705 mm | — |
| Width declared | 90.9 in · 2,310 mm | 86.0–109.6 in · 2,184–2,784 mm | differs |
| Ground clearance declared | 14.5 in · 369 mm | 15.4 in · 390 mm | +6% TM165 |
| Turning radius, braked declared | — | 19.2 ft · 5.85 m | — |
| Fuel tank declared | 232.5 qt · 220.0 L | 343.4 qt · 325.0 L | +48% TM165 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
New Holland 8560 A sources
- Source: Traktorenlexikon, “New Holland 8560”
New Holland TM165 sources
- Source: Traktorenlexikon, “New Holland TM165”