11 material differences · fewer than 12
Tractor oneNew Holland 8360 A1996–1999No measured PTO figureTractor twoVALMET 8350 HiTech1998–2003No measured PTO figure
Which should you choose?
Read our verdict on the 8360 A and the 8350 HiTech → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | 8360 A | 8350 HiTech | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 133.2 hp | 133.2 hp | — |
| Engine declared | NEW HOLLAND 675 T-WL | VALMET 620 DSRIE | differs |
| Displacement declared | 7.48 L | 6.59 L | +13% 8360 A |
| Maximum torque declared | 420 lb·ft · 569 N·m | 471 lb·ft · 639 N·m | +12% 8350 HiTech |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9–31.1 mph · 40–50 km/h | differs |
| Clutch declared | Electro-hydraulic wet multi-disc clutch | Pedal-operated dry Fichtel & Sachs single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 25.7 gpm · 97.3 L/min | 20.2 gpm · 76.4 L/min | +27% 8360 A |
| Pressure declared | 2,799 psi · 193 bar | 3,046 psi · 210 bar | +9% 8350 HiTech |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 13,062 lb · 5,925 kg | 12,610 lb · 5,720 kg | — |
| Maximum permissible mass declared | 19,842 lb · 9,000 kg | 19,842 lb · 9,000 kg | — |
| Wheelbase declared | 107.2 in · 2,723 mm | 100.7 in · 2,558 mm | +6% 8360 A |
| Length declared | 184.6 in · 4,690 mm | 194.5 in · 4,940 mm | +5% 8350 HiTech |
| Width declared | 95.3 in · 2,420 mm | 92.0 in · 2,338 mm | — |
| Ground clearance declared | 15.0 in · 380 mm | 18.1 in · 460 mm | +21% 8350 HiTech |
| Fuel tank declared | 232.5 qt · 220.0 L | 174.4 qt · 165.0 L | +33% 8360 A |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
New Holland 8360 A sources
- Source: Traktorenlexikon, “New Holland 8360”
VALMET 8350 HiTech sources
- Source: Traktorenlexikon, “Valmet Mega-8350 HiTech”
- Source: Traktorenlexikon, “Valmet Mega-8350”