12 material differences
Tractor oneNew Holland 81601996–1999No measured PTO figureTractor twoSAME Silver 100.6 DT1995–2004No measured PTO figure
Which should you choose?
Read our verdict on the 8160 and the Silver 100.6 DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | 8160 | Silver 100.6 DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 98.6 hp | 98.6 hp | — |
| Engine declared | NEW HOLLAND 675-TC | SAME-DEUTZ-FAHR 1000.6 A 1 | differs |
| Displacement declared | 7.48 L | 6.00 L | +25% 8160 |
| Maximum torque declared | 297 lb·ft · 403 N·m | 249 lb·ft · 337 N·m | +20% 8160 |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 24.9 mph · 40 km/h | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 26.3 gpm · 99.6 L/min | 15.1 gpm · 57.0 L/min | +75% 8160 |
| Pressure declared | 2,408–2,582 psi · 166–178 bar | 2,176 psi · 150 bar | differs |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,574 lb · 5,250 kg | 9,877 lb · 4,480 kg | +17% 8160 |
| Maximum permissible mass declared | 16,535 lb · 7,500 kg | 15,432 lb · 7,000 kg | +7% 8160 |
| Wheelbase declared | 107.2 in · 2,723 mm | 103.7 in · 2,635 mm | — |
| Length declared | 179.5 in · 4,560 mm | 175.4 in · 4,455 mm | — |
| Width declared | 92.5 in · 2,350 mm | 78.0–103.1 in · 1,980–2,620 mm | differs |
| Ground clearance declared | 14.2 in · 360 mm | 18.7 in · 475 mm | +32% Silver 100.6 DT |
| Turning radius, braked declared | — | 12.8 ft · 3.91 m | — |
| Fuel tank declared | 232.5 qt · 220.0 L | 158.5 qt · 150.0 L | +47% 8160 |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
New Holland 8160 sources
Source
- Source: Traktorenlexikon, “New Holland 8160”
SAME Silver 100.6 DT sources
Source
- Source: Traktorenlexikon, “SAME Silver 100.6”