New Holland 4835 (A) vs VALMET 465 (465-4)

13 material differences

Tractor one

1996–1998

No measured PTO figure

Tractor two

1993–1997

No measured PTO figure

Which should you choose?

Read our verdict on the 4835 (A) and the 465 (465-4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

13 material differences · 4 fields identical or within 5%, which is not counted as material

New Holland 4835 (A) and VALMET 465 (465-4), field by field
Field	4835 (A)	465 (465-4)	Gap
Engine
Engine power, claimed claimed	64.1 hp	69.1 hp	+8% 465 (465-4)
Engine declared	Iveco 8045.06	VALMET 320 DS	differs
Displacement declared	3.61 L	3.30 L	+10% 4835 (A)
Maximum torque declared	146 lb·ft · 198 N·m	192 lb·ft · 260 N·m	+31% 465 (465-4)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	dry LuK double clutch	dry LuK double clutch	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	11.8 gpm · 44.5 L/min	14.5 gpm · 55.0 L/min	+24% 465 (465-4)
Pressure declared	2,103 psi · 145 bar	2,901 psi · 200 bar	+38% 465 (465-4)
Three-point lift at ends declared	6,393 lb · 2,900 kg	5,688 lb · 2,580 kg	+12% 4835 (A)
Rear PTO speeds declared	540/540E/1000 rpm	540E/540 rpm	differs
Weight & dimensions
Unladen weight declared	8,620 lb · 3,910 kg	6,217 lb · 2,820 kg	+39% 4835 (A)
Maximum permissible mass declared	11,464 lb · 5,200 kg	—	—
Wheelbase declared	92.2 in · 2,342 mm	83.1 in · 2,112 mm	+11% 4835 (A)
Length declared	153.9 in · 3,910 mm	146.1 in · 3,710 mm	+5% 4835 (A)
Width declared	83.5 in · 2,120 mm	79.9 in · 2,030 mm	—
Height declared	98.4 in · 2,500 mm	102.6 in · 2,605 mm	—
Ground clearance declared	18.9 in · 480 mm	15.9 in · 405 mm	+19% 4835 (A)
Turning radius, braked declared	12.4 ft · 3.79 m	11.5 ft · 3.50 m	+8% 4835 (A)
Fuel tank declared	121.5 qt · 115.0 L	77.1 qt · 73.0 L	+58% 4835 (A)

Source

Source