7 material differences · fewer than 12

Tractor oneNew Holland 4835 (A)1996–1998No measured PTO figureTractor twoRenault Ceres 75 X (A)1994–1998No measured PTO figure

Which should you choose?

Read our verdict on the 4835 (A) and the Ceres 75 X (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

7 material differences · 10 fields identical or within 5%, which is not counted as material

New Holland 4835 (A) and Renault Ceres 75 X (A), field by field
Field	4835 (A)	Ceres 75 X (A)	Gap
Engine
Engine power, claimed claimed	64.1 hp	64.1 hp	—
Engine declared	Iveco 8045.06	JOHN DEERE 4039 DRT 35	differs
Displacement declared	3.61 L	3.92 L	+8% Ceres 75 X (A)
Maximum torque declared	146 lb·ft · 198 N·m	169 lb·ft · 229 N·m	+16% Ceres 75 X (A)
Transmission
Top speed declared	18.6–24.9 mph · 30–40 km/h	18.6–24.9 mph · 30–40 km/h	—
Clutch declared	dry LuK double clutch	Dry LuK double clutch	—
Hydraulics & hitch
Pump flow declared	11.8 gpm · 44.5 L/min	—	—
Pressure declared	2,103 psi · 145 bar	—	—
Three-point lift, at the coupling points declared	6,393 lb · 2,900 kg	6,327 lb · 2,870 kg	—
Rear PTO speeds declared	540/540E/1000 rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	8,620 lb · 3,910 kg	6,967 lb · 3,160 kg	+24% 4835 (A)
Maximum permissible mass declared	11,464 lb · 5,200 kg	11,684 lb · 5,300 kg	—
Wheelbase declared	92.2 in · 2,342 mm	94.8–95.7 in · 2,407–2,430 mm	—
Length declared	153.9 in · 3,910 mm	156.7 in · 3,979 mm	—
Width declared	83.5–99.2 in · 2,120–2,520 mm	73.2–92.3 in · 1,860–2,345 mm	differs
Height, over the cab declared	98.4 in · 2,500 mm	99.2 in · 2,520 mm	—
Ground clearance declared	18.9 in · 480 mm	16.9 in · 430 mm	+12% 4835 (A)
Turning radius, braked declared	12.4 ft · 3.79 m	12.5 ft · 3.80 m	—
Fuel tank declared	121.5 qt · 115.0 L	121.5 qt · 115.0 L	—

Source

Source