8 material differences · fewer than 12
Tractor oneMercedes-Benz MB trac 11001976–1986No measured PTO figureTractor twoSAME Buffalo DT1968–1974No measured PTO figure
Which should you choose?
Read our verdict on the MB trac 1100 and the Buffalo DT → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | MB trac 1100 | Buffalo DT | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 109 hp | 103.5 hp | — |
| Engine declared | Daimler-Benz OM 352 | SAME DA 1006-V | differs |
| Displacement declared | 5.68 L | 5.66 L | — |
| Maximum torque declared | 268 lb·ft · 363 N·m | 280 lb·ft · 380 N·m | — |
| Transmission | |||
| Top speed declared | 15.5–24.9 mph · 25–40 km/h | 15.5 mph · 25 km/h | differs |
| Clutch declared | dry double clutch | Pedal-operated dry SAME single-disc clutch | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | 11.7 gpm · 44.3 L/min | 7.9 gpm · 30.0 L/min | +48% MB trac 1100 |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 12,214–13,228 lb · 5,540–6,000 kg | 9,524 lb · 4,320 kg | differs |
| Wheelbase declared | 104.3 in · 2,650 mm | 100.8 in · 2,560 mm | — |
| Length declared | 184.3 in · 4,680 mm | 157.5 in · 4,000 mm | +17% MB trac 1100 |
| Width declared | 98.4 in · 2,500 mm | 85.8 in · 2,180 mm | +15% MB trac 1100 |
| Ground clearance declared | 22.4 in · 570 mm | 17.3 in · 440 mm | +30% MB trac 1100 |
| Turning radius, braked declared | — | 16.4 ft · 5.00 m | — |
| Fuel tank declared | 179.6 qt · 170 L | — | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Mercedes-Benz MB trac 1100 sources
- Source: Traktorenlexikon, “Mercedes-Benz MB trac 1100”
SAME Buffalo DT sources
- Source: Traktorenlexikon, “SAME Buffalo”