Massey-Harris-Ferguson FE 35 Spezial vs Nuffield PM-4

8 material differences · fewer than 12

Tractor one

1956–1960

No measured PTO figure

Tractor two

1951–1957

No measured PTO figure

Which should you choose?

Read our verdict on the FE 35 Spezial and the PM-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

8 material differences · 1 fields identical or within 5%, which is not counted as material

Massey-Harris-Ferguson FE 35 Spezial and Nuffield PM-4, field by field
Field	FE 35 Spezial	PM-4	Gap
Engine
Engine power, claimed claimed	32.6 hp	48.0 hp	+47% PM-4
Engine declared	Standard-Motors 23-C	MORRIS-COMMERCIAL 38 T/V	differs
Displacement declared	—	3.77 L	—
Maximum torque declared	—	148 lb·ft · 200 N·m	—
Transmission
Top speed declared	12.4 mph · 20 km/h	17.4 mph · 28 km/h	+40% PM-4
Clutch declared	—	Pedal-operated dry single-plate clutch	—
Hydraulics & hitch
Pump flow declared	—	7.2 gpm · 27.3 L/min	—
Pressure declared	2,489 psi · 172 bar	—	—
Three-point lift at ends declared	1,510 lb · 685 kg	—	—
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,208 lb · 1,455 kg	4,546 lb · 2,062 kg	+42% PM-4
Wheelbase declared	72.0 in · 1,830 mm	78.0 in · 1,981 mm	+8% PM-4
Length declared	109.9 in · 2,792 mm	121.5 in · 3,086 mm	+11% PM-4
Width declared	63.8 in · 1,620 mm	69.0 in · 1,753 mm	+8% PM-4
Height declared	53.9 in · 1,370 mm	80.7 in · 2,051 mm	+50% PM-4
Ground clearance declared	12.2 in · 310 mm	17.0 in · 432 mm	+39% PM-4
Turning radius, braked declared	9.5 ft · 2.90 m	—	—
Fuel tank declared	—	67.2 qt · 63.6 L	—

Source

Source