5 material differences · fewer than 12
Tractor oneMassey Ferguson MF 48401978–1986No measured PTO figureTractor twoSchlüter Super Trac 3000 TVL-LS1988–1989No measured PTO figure
Which should you choose?
We will not advise between these two machines, because they were not built in overlapping years (1978–1986; 1988–1989). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
5 material differences · 1 fields identical or within 5%, which is not counted as material
| Field | MF 4840 | Super Trac 3000 TVL-LS | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 256.8 hp | 276 hp | +8% Super Trac 3000 TVL-LS |
| Engine declared | — | MAN D 2566 MTE | — |
| Displacement declared | — | 11.41 L | — |
| Maximum torque declared | — | 841 lb·ft · 1,140 N·m | — |
| Transmission | |||
| Top speed declared | 19.2 mph · 30.9 km/h | 21.4 mph · 34.5 km/h | +12% Super Trac 3000 TVL-LS |
| Clutch declared | wet disc clutch with 14 inch plates | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | — | 14.0 gpm · 53.0 L/min | — |
| Pressure declared | — | 2,611 psi · 180 bar | — |
| Rear PTO speeds declared | 1000 rpm | 1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 26,059 lb · 11,820 kg | 21,385–23,810 lb · 9,700–10,800 kg | differs |
| Wheelbase declared | 133.9 in · 3,400 mm | 116.1 in · 2,950 mm | +15% MF 4840 |
| Length declared | 252.0 in · 6,400 mm | 234.3–239.4 in · 5,950–6,080 mm | differs |
| Width declared | 106.3 in · 2,700 mm | 98.4–103.1 in · 2,500–2,620 mm | differs |
| Turning radius, braked declared | — | 21.3 ft · 6.50 m | — |
| Fuel tank declared | — | 454.4 qt · 430 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 4840 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 4840”
Schlüter Super Trac 3000 TVL-LS sources
- Source: Traktorenlexikon, “Schlüter Super Trac 3000 TVL-LS”
- Source: Traktorenlexikon, “Fendt Favorit 626 LS/LSA”