8 material differences · fewer than 12
Tractor oneMassey Ferguson MF 390 Turbo1988–1998No measured PTO figureTractor twoSteyr 8110 (a)from 1984No measured PTO figure
Which should you choose?
Read our verdict on the MF 390 Turbo and the 8110 (a) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
8 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | MF 390 Turbo | 8110 (a) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 88.8 hp | 88.8 hp | — |
| Engine declared | Perkins AT 4.236 | Steyr WD-611.43 | differs |
| Displacement declared | 3.87 L | 5.18 L | +34% 8110 (a) |
| Maximum torque declared | 247 lb·ft · 335 N·m | 238 lb·ft · 323 N·m | — |
| Transmission | |||
| Top speed declared | 18.6–24.9 mph · 30–40 km/h | 18.6–24.9 mph · 30–40 km/h | — |
| Clutch declared | Pedal-operated, dry and air-cooled single clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 9.0 gpm · 34.0 L/min | — | — |
| Pressure declared | 2,466 psi · 170 bar | 3,553 psi · 245 bar | +44% 8110 (a) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 7,937 lb · 3,600 kg | 8,576 lb · 3,890 kg | +8% 8110 (a) |
| Wheelbase declared | 92.5 in · 2,350 mm | 98.8 in · 2,509 mm | +7% 8110 (a) |
| Length declared | 194.7 in · 4,945 mm | 163.4 in · 4,150 mm | +19% MF 390 Turbo |
| Width declared | 83.1 in · 2,110 mm | 76.4 in · 1,940 mm | +9% MF 390 Turbo |
| Ground clearance declared | 18.1 in · 460 mm | — | — |
| Turning radius, braked declared | — | 12.1 ft · 3.70 m | — |
| Fuel tank declared | 124.7 qt · 118 L | 128.9 qt · 122.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 390 Turbo sources
- Source: Traktorenlexikon, “Massey Ferguson MF 390 Turbo”
- Source: Traktorenlexikon, “Massey Ferguson MF 398”
Steyr 8110 (a) sources
- Source: Traktorenlexikon, “Steyr 8110”