Massey Ferguson MF 383 (A) vs VALMET 6000-4

15 material differences

Tractor one

1987–1994

No measured PTO figure

Tractor two

1993–1996

No measured PTO figure

Which should you choose?

Read our verdict on the MF 383 (A) and the 6000-4 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

15 material differences · 1 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 383 (A) and VALMET 6000-4, field by field
Field	MF 383 (A)	6000-4	Gap
Engine
Engine power, claimed claimed	70.1 hp	74.0 hp	+6% 6000-4
Engine declared	Perkins A 4.236	VALMET 420 D	differs
Displacement declared	3.87 L	4.40 L	+14% 6000-4
Maximum torque declared	195 lb·ft · 264 N·m	182 lb·ft · 247 N·m	+7% MF 383 (A)
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Dry and air-cooled OMG double clutch	dry single-plate clutch	differs
Hydraulics & hitch
Hydraulic centre declared	Open centre	—	—
Pump flow declared	—	21.2 gpm · 80.3 L/min	—
Pressure declared	2,756 psi · 190 bar	2,901 psi · 200 bar	+5% 6000-4
Three-point lift at ends declared	5,291 lb · 2,400 kg	9,601 lb · 4,355 kg	+81% 6000-4
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	6,305 lb · 2,860 kg	9,193 lb · 4,170 kg	+46% 6000-4
Maximum permissible mass declared	—	14,330 lb · 6,500 kg	—
Wheelbase declared	89.8 in · 2,281 mm	99.6 in · 2,530 mm	+11% 6000-4
Length declared	146.1 in · 3,710 mm	175.2 in · 4,450 mm	+20% 6000-4
Width declared	78.3 in · 1,990 mm	85.2 in · 2,165 mm	+9% 6000-4
Height declared	91.3 in · 2,320 mm	105.9 in · 2,690 mm	+16% 6000-4
Ground clearance declared	20.3 in · 515 mm	16.9 in · 430 mm	+20% MF 383 (A)
Turning radius, braked declared	13.0 ft · 3.96 m	15.3 ft · 4.65 m	+17% 6000-4
Fuel tank declared	90.9 qt · 86.0 L	167.0 qt · 158.0 L	+84% 6000-4

Source

Source