Massey Ferguson MF 375 (A) or Renault 68-14 RS?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 375 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 68-14 RS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson 375 (A) suits loader and hydraulic implement work better on this data: 54% (22.1 L/min / 5.8 gpm) more hydraulic flow.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 375 (A) and Renault 68-14 RS, with the call on each
QuestionMF 375 (A)68-14 RSCall
Which puts more power through the PTO shaft?50.0 kW (67.1 hp)Traktorenlexikon, “Massey Ferguson MF 375”50 kW (67 hp)Traktorenlexikon, “Renault 68-14 RA/RS R7722”Not comparableNot comparable on power at the PTO shaft: the MF 375 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 68-14 RS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 375 (A) and the 68-14 RS.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the MF 375 (A) and the 68-14 RS.
Which pumps more oil for implements?63.3 L/min (16.7 gpm)Traktorenlexikon, “Massey Ferguson MF 375”41.2 L/min (10.9 gpm)Traktorenlexikon, “Renault 68-14 RA/RS R7722”AheadThe Massey Ferguson 375 (A) has 54% more hydraulic flow (22.1 L/min / 5.8 gpm) than the Renault 68-14 RS (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?3,060 kg (6,746 lb)Traktorenlexikon, “Massey Ferguson MF 375”3,000 kg (6,614 lb)Traktorenlexikon, “Renault 68-14 RA/RS R7722”EvenEven on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
Which is heavier, for traction?3,150 kg (6,945 lb)Traktorenlexikon, “Massey Ferguson MF 375”3,604 kg (7,945 lb)Traktorenlexikon, “Renault 68-14 RA/RS R7722”Ahead (a fact, not an advantage)The Renault 68-14 RS is 14% heavier (454 kg / 1,001 lb) than the Massey Ferguson 375 (A) (both unladen weight, as stated by the source).
Which may carry more ballast and load?6,200 kg (13,669 lb)Traktorenlexikon, “Massey Ferguson MF 375”—No figureNo call on maximum permissible mass: no figure on record for the 68-14 RS.
Which has the wider choice of gears?8 to 12Traktorenlexikon, “Massey Ferguson MF 375”12 to 16Traktorenlexikon, “Renault 68-14 RA/RS R7722”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the MF 375 (A) and the 68-14 RS.
Which is faster on the road?30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 375”30 km/h (18.6 mph)Traktorenlexikon, “Renault 68-14 RA/RS R7722”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpm / 1000 rpmTraktorenlexikon, “Massey Ferguson MF 375”540/1000 rpmTraktorenlexikon, “Renault 68-14 RA/RS R7722”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 375”independentTraktorenlexikon, “Renault 68-14 RA/RS R7722”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?Two-wheel or four-wheel driveTraktorenlexikon, “Massey Ferguson MF 375”4WDTraktorenlexikon, “Renault 68-14 RA/RS R7722”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1987–19971984–1987EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson 375 (A) has 54% more hydraulic flow (22.1 L/min / 5.8 gpm) than the Renault 68-14 RS (both pump flow, as stated by the source).
  • The Renault 68-14 RS is 14% heavier (454 kg / 1,001 lb) than the Massey Ferguson 375 (A) (both unladen weight, as stated by the source).
  • Even on three-point lift (both lift at the hitch ends, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the MF 375 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 68-14 RS has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources