10 material differences · fewer than 12
Tractor oneMassey Ferguson MF 363 (A)1987–1994No measured PTO figureTractor twoNew Holland TD 60 D (A)2002–2008No measured PTO figure
Which should you choose?
Read our verdict on the MF 363 (A) and the TD 60 D (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
10 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | MF 363 (A) | TD 60 D (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 58 hp | 58.2 hp | — |
| Engine declared | Perkins T 3.152-4 Turbo | IVECO 8035.050 | differs |
| Displacement declared | 2.50 L | 2.93 L | +17% TD 60 D (A) |
| Maximum torque declared | 156 lb·ft · 212 N·m | 133 lb·ft · 181 N·m | +17% MF 363 (A) |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Clutch declared | Dry and air-cooled double clutch | — | — |
| Hydraulics & hitch | |||
| Hydraulic centre declared | Open centre | — | — |
| Pump flow declared | — | 11.4 gpm · 43.0 L/min | — |
| Pressure declared | 2,756 psi · 190 bar | 3,553 psi · 245 bar | +29% TD 60 D (A) |
| Three-point lift, at the coupling points declared | 5,291 lb · 2,400 kg | 6,477 lb · 2,938 kg | +22% TD 60 D (A) |
| Rear PTO speeds declared | 540/1000 rpm | 540/540E/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,291 lb · 2,400 kg | 5,657 lb · 2,566 kg | +7% TD 60 D (A) |
| Wheelbase declared | 83.7 in · 2,126 mm | 85.6 in · 2,175 mm | — |
| Length declared | 139.4 in · 3,540 mm | 142.9 in · 3,630 mm | — |
| Width declared | 75.8 in · 1,925 mm | 70.8–90.5 in · 1,799–2,299 mm | differs |
| Ground clearance declared | 19.3 in · 490 mm | 14.6 in · 371 mm | +32% MF 363 (A) |
| Turning radius, braked declared | 11.7 ft · 3.57 m | — | — |
| Fuel tank declared | 90.9 qt · 86.0 L | 95.1 qt · 90.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 363 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 363”
New Holland TD 60 D (A) sources
- Source: Traktorenlexikon, “New Holland TD 60 D”