Massey Ferguson MF 362 (A) or SOMECA 540 (TD)?

Which should you choose?

On performance, every comparable figure that differs favours the Massey Ferguson MF 362 (A): hydraulic flow and three-point lift. It is also ahead on top speed.

  • The Massey Ferguson MF 362 (A) suits loader and hydraulic implement work better on this data: 83% (18.0 L/min / 4.8 gpm) more hydraulic flow and 46% (741 kg / 1,633 lb) more three-point lift.
  • The Massey Ferguson MF 362 (A) suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 362 (A) and SOMECA 540 (TD), with the call on each
QuestionMF 362 (A)540 (TD)Call
Which puts more power through the PTO shaft?33.2 kW (44.5 hp)Traktorenlexikon, “Massey Ferguson MF 362”33.3 kW (44.7 hp)Traktorenlexikon, “Someca 540”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 362 (A) and the 540 (TD).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MF 362 (A) and the 540 (TD).
Which pumps more oil for implements?39.8 L/min (10.5 gpm)Traktorenlexikon, “Massey Ferguson MF 362”21.8 L/min (5.8 gpm)Traktorenlexikon, “Someca 540”AheadThe Massey Ferguson MF 362 (A) has 83% more hydraulic flow (18.0 L/min / 4.8 gpm) than the SOMECA 540 (TD) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?2,361 kg (5,204 lb)Traktorenlexikon, “Massey Ferguson MF 362”1,620 kg (3,571 lb)Traktorenlexikon, “Someca 540”AheadThe Massey Ferguson MF 362 (A) has 46% more lift (741 kg / 1,633 lb) than the SOMECA 540 (TD) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,770 kg (6,107 lb)Traktorenlexikon, “Massey Ferguson MF 362”1,865 kg (4,112 lb)Traktorenlexikon, “Someca 540”Ahead (a fact, not an advantage)The Massey Ferguson MF 362 (A) is 49% heavier (905 kg / 1,995 lb) than the SOMECA 540 (TD) (both unladen weight, as stated by the source).
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the MF 362 (A) and the 540 (TD).
Which has the wider choice of gears?8Traktorenlexikon, “Massey Ferguson MF 362”8 to 12Traktorenlexikon, “Someca 540”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MF 362 (A) and the 540 (TD).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 362”25 km/h (15.5 mph)Traktorenlexikon, “Someca 540”AheadThe Massey Ferguson MF 362 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 540 (TD) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540/540E rpmTraktorenlexikon, “Massey Ferguson MF 362”540 rpmTraktorenlexikon, “Someca 540”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 362”No figureNo call on PTO independence: not stated for the 540 (TD).
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 362”Two-wheel or four-wheel driveTraktorenlexikon, “Someca 540”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1988–19961973–1982Ahead (a fact, not an advantage)The Massey Ferguson MF 362 (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 362 (A) has 83% more hydraulic flow (18.0 L/min / 4.8 gpm) than the SOMECA 540 (TD) (both pump flow, as stated by the source).
  • The Massey Ferguson MF 362 (A) has 46% more lift (741 kg / 1,633 lb) than the SOMECA 540 (TD) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 362 (A) is 49% heavier (905 kg / 1,995 lb) than the SOMECA 540 (TD) (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 362 (A) has 20% more top speed (5.0 km/h / 3.1 mph) than the SOMECA 540 (TD) (both top speed forward, as stated by the source).
  • The Massey Ferguson MF 362 (A) is newer: production began 15 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources