Massey Ferguson MF 355 (A) vs VALMET 305 (305/4)

9 material differences · fewer than 12

Tractor one

1988–1994

No measured PTO figure

Tractor two

1985–1989

No measured PTO figure

Which should you choose?

Read our verdict on the MF 355 (A) and the 305 (305/4) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 6 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 355 (A) and VALMET 305 (305/4), field by field
Field	MF 355 (A)	305 (305/4)	Gap
Engine
Engine power, claimed claimed	52 hp	52 hp	—
Engine declared	Perkins AT 3.152-4	VALMET TD-27 DS 3	differs
Displacement declared	2.50 L	2.69 L	+7% 305 (305/4)
Maximum torque declared	137 lb·ft · 186 N·m	132 lb·ft · 179 N·m	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated, dry and air-cooled single clutch	Dry Fichtel & Sachs dual clutch	differs
Hydraulics & hitch
Pump flow declared	13.9 gpm · 52.5 L/min	9.4 gpm · 35.6 L/min	+47% MF 355 (A)
Pressure declared	2,466 psi · 170 bar	4,206 psi · 290 bar	+71% 305 (305/4)
Three-point lift at ends declared	—	3,957 lb · 1,795 kg	—
Rear PTO speeds declared	540/540E rpm	540 rpm	differs
Weight & dimensions
Unladen weight declared	5,842 lb · 2,650 kg	5,975 lb · 2,710 kg	—
Wheelbase declared	81.9 in · 2,080 mm	83.1 in · 2,112 mm	—
Length declared	133.9 in · 3,400 mm	146.1 in · 3,710 mm	+9% 305 (305/4)
Width declared	70.9 in · 1,800 mm	68.7 in · 1,745 mm	—
Height declared	94.9 in · 2,410 mm	101.2 in · 2,570 mm	+7% 305 (305/4)
Ground clearance declared	—	18.1 in · 460 mm	—
Turning radius, braked declared	—	10.2 ft · 3.10 m	—
Fuel tank declared	71.9 qt · 68.0 L	77.1 qt · 73.0 L	+7% 305 (305/4)

Source

Source