Massey Ferguson MF 355 (A) or UTB U-533 (DT)?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 355 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-533 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Massey Ferguson MF 355 (A) suits loader and hydraulic implement work better on this data: 54% (18.5 L/min / 4.9 gpm) more hydraulic flow.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MF 355 (A) | U-533 (DT) | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 39 kW (52 hp)Traktorenlexikon, “Massey Ferguson MF 355” | 39 kW (52 hp)Traktorenlexikon, “UTB U 533” | Not comparableNot comparable on power at the PTO shaft: the MF 355 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-533 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 355 (A) and the U-533 (DT). |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MF 355 (A) and the U-533 (DT). |
| Which pumps more oil for implements? | 52.5 L/min (13.9 gpm)Traktorenlexikon, “Massey Ferguson MF 355” | 34.0 L/min (9.0 gpm)Traktorenlexikon, “UTB U 533” | AheadThe Massey Ferguson MF 355 (A) has 54% more hydraulic flow (18.5 L/min / 4.9 gpm) than the UTB U-533 (DT) (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 2,100 kg (4,630 lb)Traktorenlexikon, “UTB U 533” | No figureNo call on three-point lift: no figure on record for the MF 355 (A). |
| Which is heavier, for traction? | 2,650 kg (5,842 lb)Traktorenlexikon, “Massey Ferguson MF 355” | 2,615 kg (5,765 lb)Traktorenlexikon, “UTB U 533” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the MF 355 (A) and the U-533 (DT). |
| Which has the wider choice of gears? | 8Traktorenlexikon, “Massey Ferguson MF 355” | 8 to 12Traktorenlexikon, “UTB U 533” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the MF 355 (A) and the U-533 (DT). |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 355” | 30 km/h (18.6 mph)Traktorenlexikon, “UTB U 533” | EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which offers more PTO speeds? | 540/540E rpmTraktorenlexikon, “Massey Ferguson MF 355” | 540/1000 rpmTraktorenlexikon, “UTB U 533” | AheadThe UTB U-533 (DT) offers 1000 rpm at the PTO, which the Massey Ferguson MF 355 (A) does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the MF 355 (A) and the U-533 (DT). |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 355” | 4WDTraktorenlexikon, “UTB U 533” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1988–1994 | 1988–2004 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 355 (A) has 54% more hydraulic flow (18.5 L/min / 4.9 gpm) than the UTB U-533 (DT) (both pump flow, as stated by the source).
- The UTB U-533 (DT) offers 1000 rpm at the PTO, which the Massey Ferguson MF 355 (A) does not (as stated by the sources).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on drive: every machine is available with four-wheel drive.
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the MF 355 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the U-533 (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources