Massey Ferguson MF 355 (A) vs Renault 58-12 LS

6 material differences · fewer than 12

Tractor one

1988–1994

No measured PTO figure

Tractor two

1987–1989

No measured PTO figure

Which should you choose?

Read our verdict on the MF 355 (A) and the 58-12 LS → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

6 material differences · 7 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 355 (A) and Renault 58-12 LS, field by field
Field	MF 355 (A)	58-12 LS	Gap
Engine
Engine power, claimed claimed	52 hp	53.2 hp	—
Engine declared	Perkins AT 3.152-4	MWM D 226-3	differs
Displacement declared	2.50 L	3.12 L	+25% 58-12 LS
Maximum torque declared	137 lb·ft · 186 N·m	—	—
Transmission
Top speed declared	18.6 mph · 30 km/h	18.6 mph · 30 km/h	—
Clutch declared	Pedal-operated, dry and air-cooled single clutch	Dry VALEO double clutch	differs
Hydraulics & hitch
Pump flow declared	13.9 gpm · 52.5 L/min	8.5 gpm · 32.3 L/min	+63% MF 355 (A)
Pressure declared	2,466 psi · 170 bar	—	—
Three-point lift at ends declared	—	6,305 lb · 2,860 kg	—
Rear PTO speeds declared	540/540E rpm	540/1000 rpm	differs
Weight & dimensions
Unladen weight declared	5,842 lb · 2,650 kg	5,820 lb · 2,640 kg	—
Maximum permissible mass declared	—	11,244 lb · 5,100 kg	—
Wheelbase declared	81.9 in · 2,080 mm	89.4 in · 2,270 mm	+9% 58-12 LS
Length declared	133.9 in · 3,400 mm	137.4 in · 3,490 mm	—
Width declared	70.9 in · 1,800 mm	70.3 in · 1,785 mm	—
Height declared	94.9 in · 2,410 mm	96.9 in · 2,460 mm	—
Ground clearance declared	—	15.7 in · 400 mm	—
Turning radius, braked declared	—	11.5 ft · 3.50 m	—
Fuel tank declared	71.9 qt · 68.0 L	68.7 qt · 65.0 L	—

Source

Source