12 material differences
Tractor oneMassey Ferguson MF 352 (A)1993–1997No measured PTO figureTractor twoNew Holland 4135 (A)1996–1999No measured PTO figure
Which should you choose?
Read our verdict on the MF 352 (A) and the 4135 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
12 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | MF 352 (A) | 4135 (A) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 54.3 hp | 54.3 hp | — |
| Engine declared | Perkins AT 3.152-4 | IVECO 8035.06 | differs |
| Displacement declared | 2.50 L | 2.71 L | +8% 4135 (A) |
| Maximum torque declared | 133 lb·ft · 180 N·m | 130 lb·ft · 176 N·m | — |
| Transmission | |||
| Top speed declared | 18.6 mph · 30 km/h | 18.6–24.9 mph · 30–40 km/h | differs |
| Hydraulics & hitch | |||
| Hydraulic centre declared | — | Open centre | — |
| Pump flow declared | 15.1 gpm · 57.0 L/min | 9.1 gpm · 34.5 L/min | +65% MF 352 (A) |
| Pressure declared | 2,973–3,481 psi · 205–240 bar | 3,118 psi · 215 bar | differs |
| Three-point lift, at the coupling points declared | 4,729 lb · 2,145 kg | 6,614 lb · 3,000 kg | +40% 4135 (A) |
| Rear PTO speeds declared | 540 rpm / 1000 rpm | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,512 lb · 2,500 kg | 5,809 lb · 2,635 kg | +5% 4135 (A) |
| Maximum permissible mass declared | — | 8,488 lb · 3,850 kg | — |
| Wheelbase declared | 81.9 in · 2,080 mm | 78.7 in · 1,999 mm | — |
| Length declared | 141.9 in · 3,604 mm | 127.6 in · 3,241 mm | +11% MF 352 (A) |
| Width declared | 77.9 in · 1,979 mm | 60.6–84.3 in · 1,540–2,140 mm | differs |
| Ground clearance declared | 14.2 in · 360 mm | 18.1 in · 460 mm | +28% 4135 (A) |
| Fuel tank declared | 71.9 qt · 68.0 L | 77.1 qt · 73.0 L | +7% 4135 (A) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 352 (A) sources
Source
- Source: Traktorenlexikon, “Massey Ferguson MF 352”
- Source: Traktorenlexikon, “Massey Ferguson MF 253”
New Holland 4135 (A) sources
Source
- Source: Traktorenlexikon, “New Holland 4135”
- Source: Traktorenlexikon, “New Holland 3435”