Massey Ferguson MF 3065 (A) or Renault Ceres 95 X (A)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 3065 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Ceres 95 X (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Renault Ceres 95 X (A) suits loader and hydraulic implement work better on this data: 59% (1,689 kg / 3,724 lb) more three-point lift.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 3065 (A) and Renault Ceres 95 X (A), with the call on each
QuestionMF 3065 (A)Ceres 95 X (A)Call
Which puts more power through the PTO shaft?62.5 kW (83.8 hp)Traktorenlexikon, “Massey Ferguson MF 3065”62.6 kW (83.9 hp)Traktorenlexikon, “Renault Ceres 95X”Not comparableNot comparable on power at the PTO shaft: the MF 3065 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Ceres 95 X (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 3065 (A) and the Ceres 95 X (A).
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MF 3065 (A) and the Ceres 95 X (A).
Which pumps more oil for implements?49.5 L/min (13.1 gpm)Traktorenlexikon, “Massey Ferguson MF 3065”52.9 L/min (14.0 gpm)Traktorenlexikon, “Renault Ceres 95X”EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
Which lifts more on the three-point hitch?2,881 kg (6,351 lb)Traktorenlexikon, “Massey Ferguson MF 3065”4,570 kg (10,075 lb)Traktorenlexikon, “Renault Ceres 95X”AheadThe Renault Ceres 95 X (A) has 59% more lift (1,689 kg / 3,724 lb) than the Massey Ferguson MF 3065 (A) (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?3,485 kg (7,683 lb)Traktorenlexikon, “Massey Ferguson MF 3065”3,455 kg (7,617 lb)Traktorenlexikon, “Renault Ceres 95X”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?5,735 kg (12,644 lb)Traktorenlexikon, “Renault Ceres 95X”No figureNo call on maximum permissible mass: no figure on record for the MF 3065 (A).
Which has the wider choice of gears?32Traktorenlexikon, “Massey Ferguson MF 3065”18 to 20Traktorenlexikon, “Renault Ceres 95X”AheadThe Massey Ferguson MF 3065 (A) has 60% more forward gears (12 gears) than the Renault Ceres 95 X (A) (both forward gears, as stated by the source).
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MF 3065 (A) and the Ceres 95 X (A).
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 3065”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Renault Ceres 95X”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 3065”540/1000 rpmTraktorenlexikon, “Renault Ceres 95X”EvenEven on PTO speeds: the same speeds (540, 1000 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 3065”No figureNo call on PTO independence: not stated for the Ceres 95 X (A).
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 3065”2WD / 4WDTraktorenlexikon, “Renault Ceres 95X”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1988–19951994–1998Ahead (a fact, not an advantage)The Renault Ceres 95 X (A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Renault Ceres 95 X (A) has 59% more lift (1,689 kg / 3,724 lb) than the Massey Ferguson MF 3065 (A) (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 3065 (A) has 60% more forward gears (12 gears) than the Renault Ceres 95 X (A) (both forward gears, as stated by the source).
  • The Renault Ceres 95 X (A) is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540, 1000 rpm).
  • Even on drive: every machine is available with four-wheel drive.
  • Not comparable on power at the PTO shaft: the MF 3065 (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Ceres 95 X (A) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources