9 material differences · fewer than 12
Tractor oneMassey Ferguson MF 2831983–1987No measured PTO figureTractor twoWHITE 64101998–2001No measured PTO figure
Which should you choose?
We will not advise between these two machines, because their unladen weight differs by more than 25% (29%); they were not built in overlapping years (1983–1987; 1998–2001). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.
Field by field
9 material differences · 3 fields identical or within 5%, which is not counted as material
| Field | MF 283 | 6410 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 70 hp | 70.0 hp | — |
| Engine declared | Perkins A 4.236 | CUMMINS B 3.9 T | differs |
| Displacement declared | 3.87 L | 3.93 L | — |
| Maximum torque declared | 202 lb·ft · 274 N·m | 235 lb·ft · 319 N·m | +16% 6410 |
| Transmission | |||
| Top speed declared | 21.7 mph · 35 km/h | 18.6 mph · 30 km/h | +17% MF 283 |
| Clutch declared | Two stage clutch | Pedal operated dry single disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 9.5 gpm · 36.0 L/min | 10.6 gpm · 40.1 L/min | +11% 6410 |
| Pressure declared | — | 3,046 psi · 210 bar | — |
| Rear PTO speeds declared | 750 rpm | 540/1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 6,118 lb · 2,775 kg | 7,868 lb · 3,569 kg | +29% 6410 |
| Wheelbase declared | 90.6 in · 2,300 mm | 96.0 in · 2,438 mm | +6% 6410 |
| Length declared | 146.9 in · 3,730 mm | 161.0 in · 4,089 mm | +10% 6410 |
| Width declared | 79.1 in · 2,010 mm | 78.0 in · 1,981 mm | — |
| Ground clearance declared | 16.1 in · 410 mm | — | — |
| Fuel tank declared | — | 147.9 qt · 140.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 283 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 283”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”
WHITE 6410 sources
- Source: Traktorenlexikon, “AGCO-White 6410”
- Source: Traktorenlexikon, “White 6410”