Massey Ferguson MF 240 vs New Holland 3435 (A)

11 material differences · fewer than 12

Tractor one

1982–1985

No measured PTO figure

Tractor two

1996–1999

No measured PTO figure

Which should you choose?

Read our verdict on the MF 240 and the 3435 (A) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

11 material differences · 3 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 240 and New Holland 3435 (A), field by field
Field	MF 240	3435 (A)	Gap
Engine
Engine power, claimed claimed	46.4 hp	44.4 hp	—
Engine declared	Perkins AD 3.152	IVECO 8035.06	differs
Displacement declared	2.50 L	2.71 L	+8% 3435 (A)
Maximum torque declared	127 lb·ft · 173 N·m	107 lb·ft · 144.6 N·m	+20% MF 240
Transmission
Top speed declared	15.5–18.6 mph · 25–30 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	Pedal-operated, dry and air-cooled Auburn dual clutch	—	—
Hydraulics & hitch
Hydraulic centre declared	—	Open centre	—
Pump flow declared	5.2 gpm · 19.8 L/min	—	—
Pressure declared	—	3,118 psi · 215 bar	—
Three-point lift at ends declared	3,153 lb · 1,430 kg	4,685 lb · 2,125 kg	+49% 3435 (A)
Rear PTO speeds declared	540 rpm	540 rpm	—
Weight & dimensions
Unladen weight declared	3,924 lb · 1,780 kg	4,321 lb · 1,960 kg	+10% 3435 (A)
Maximum permissible mass declared	—	8,488 lb · 3,850 kg	—
Wheelbase declared	74.6 in · 1,896 mm	78.7 in · 1,999 mm	+5% 3435 (A)
Length declared	124.8 in · 3,170 mm	127.6 in · 3,240 mm	—
Width declared	64.2 in · 1,630 mm	60.6 in · 1,540 mm	+6% MF 240
Height declared	83.5 in · 2,120 mm	89.4 in · 2,270 mm	+7% 3435 (A)
Ground clearance declared	12.2 in · 310 mm	14.8 in · 375 mm	+21% 3435 (A)
Turning radius, braked declared	10.0 ft · 3.06 m	—	—
Fuel tank declared	50.7 qt · 48 L	44.4 qt · 42.0 L	+14% MF 240

Source

Source