Massey Ferguson MF 235 S or Massey Ferguson MF 250?

Which should you choose?

On performance, every comparable figure that differs favours the Massey Ferguson MF 235 S: hydraulic flow and three-point lift. On features, the Massey Ferguson MF 250 is ahead on drive.

  • The Massey Ferguson MF 235 S suits loader and hydraulic implement work better on this data: 26% (5.2 L/min / 1.4 gpm) more hydraulic flow and 26% (380 kg / 838 lb) more three-point lift.
  • The Massey Ferguson MF 250 suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 235 S and Massey Ferguson MF 250, with the call on each
QuestionMF 235 SMF 250Call
Which puts more power through the PTO shaft?27.2 kW (36.5 hp)Traktorenlexikon, “Massey Ferguson MF 235 S”27.4 kW (36.8 hp)Traktorenlexikon, “Massey Ferguson MF 250”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 235 S and the MF 250.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MF 235 S and the MF 250.
Which pumps more oil for implements?25 L/min (6.6 gpm)Traktorenlexikon, “Massey Ferguson MF 235 S”19.8 L/min (5.2 gpm)Traktorenlexikon, “Massey Ferguson MF 250”AheadThe Massey Ferguson MF 235 S has 26% more hydraulic flow (5.2 L/min / 1.4 gpm) than the Massey Ferguson MF 250 (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,830 kg (4,034 lb)Traktorenlexikon, “Massey Ferguson MF 235 S”1,450 kg (3,197 lb)Traktorenlexikon, “Massey Ferguson MF 250”AheadThe Massey Ferguson MF 235 S has 26% more lift (380 kg / 838 lb) than the Massey Ferguson MF 250 (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?2,180 kg (4,806 lb)Traktorenlexikon, “Massey Ferguson MF 235 S”2,120 kg (4,674 lb)Traktorenlexikon, “Massey Ferguson MF 250”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?No figureNo call on maximum permissible mass: no figure on record for the MF 235 S and the MF 250.
Which has the wider choice of gears?8Traktorenlexikon, “Massey Ferguson MF 235 S”8 to 12Traktorenlexikon, “Massey Ferguson MF 250”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MF 235 S and the MF 250.
Which is faster on the road?25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 235 S”25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 250”EvenEven on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Massey Ferguson MF 235 S”540 rpmTraktorenlexikon, “Massey Ferguson MF 250”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 235 S”independentTraktorenlexikon, “Massey Ferguson MF 250”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Massey Ferguson MF 235 S”2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 250”AheadThe Massey Ferguson MF 250 is available with four-wheel drive; the Massey Ferguson MF 235 S is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1983–19851983–1986EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 235 S has 26% more hydraulic flow (5.2 L/min / 1.4 gpm) than the Massey Ferguson MF 250 (both pump flow, as stated by the source).
  • The Massey Ferguson MF 235 S has 26% more lift (380 kg / 838 lb) than the Massey Ferguson MF 250 (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 250 is available with four-wheel drive; the Massey Ferguson MF 235 S is two-wheel drive (as stated by the sources).
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on top speed (both top speed forward, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources