Massey Ferguson MF 184 (A) vs SAME Explorer 70 (DT)

9 material differences · fewer than 12

Tractor one

1980–1983

No measured PTO figure

Tractor two

1986–1990

No measured PTO figure

Which should you choose?

Read our verdict on the MF 184 (A) and the Explorer 70 (DT) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.

9 material differences · 4 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 184 (A) and SAME Explorer 70 (DT), field by field
Field	MF 184 (A)	Explorer 70 (DT)	Gap
Engine
Engine power, claimed claimed	67 hp	69.1 hp	—
Engine declared	Perkins A 4.236	SAME 1000.4 A	differs
Displacement declared	3.87 L	4.00 L	—
Maximum torque declared	196 lb·ft · 266 N·m	—	—
Transmission
Top speed declared	15.5 mph · 25 km/h	18.6–24.9 mph · 30–40 km/h	differs
Clutch declared	pedal operated dry LUK double clutch with 279 mm diameter	Pedal-operated dry SAME single-disc clutch	differs
Hydraulics & hitch
Hydraulic control declared	—	Load sensing	—
Pump flow declared	—	9.5 gpm · 36.0 L/min	—
Pressure declared	2,418 psi · 167 bar	1,740 psi · 120 bar	+39% MF 184 (A)
Three-point lift at ends declared	3,748 lb · 1,700 kg	7,562 lb · 3,430 kg	+102% Explorer 70 (DT)
Rear PTO speeds declared	540/1000 rpm	540/1000 rpm	—
Weight & dimensions
Unladen weight declared	5,335 lb · 2,420 kg	6,085 lb · 2,760 kg	+14% Explorer 70 (DT)
Wheelbase declared	88.2 in · 2,240 mm	91.5 in · 2,325 mm	—
Length declared	142.5 in · 3,620 mm	157.1 in · 3,990 mm	+10% Explorer 70 (DT)
Width declared	—	73.6 in · 1,870 mm	—
Height declared	—	98.1 in · 2,492 mm	—
Ground clearance declared	—	19.3 in · 490 mm	—
Turning radius, braked declared	11.2 ft · 3.42 m	9.4 ft · 2.88 m	+19% MF 184 (A)
Fuel tank declared	64.5 qt · 61.0 L	70.8 qt · 67.0 L	+10% Explorer 70 (DT)

Source

Source