6 material differences · fewer than 12
Tractor oneMassey Ferguson MF 184 (A)1980–1983No measured PTO figureTractor twoMassey Ferguson MF 3050 E1988–1995No measured PTO figure
Which should you choose?
Read our verdict on the MF 184 (A) and the MF 3050 E → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
6 material differences · 5 fields identical or within 5%, which is not counted as material
| Field | MF 184 (A) | MF 3050 E | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 67 hp | 70.1 hp | — |
| Engine declared | Perkins A 4.236 | Perkins A 4.236 LD | differs |
| Displacement declared | 3.87 L | 3.86 L | — |
| Maximum torque declared | 196 lb·ft · 266 N·m | 187 lb·ft · 253 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5 mph · 25 km/h | — |
| Clutch declared | pedal operated dry LUK double clutch with 279 mm diameter | pedal-operated, dry and air-cooled VALEO single-plate clutch | differs |
| Hydraulics & hitch | |||
| Pressure declared | 2,418 psi · 167 bar | — | — |
| Rear PTO speeds declared | 540/1000 rpm | 540/1000 rpm | — |
| Weight & dimensions | |||
| Unladen weight declared | 5,335 lb · 2,420 kg | 7,848 lb · 3,560 kg | +47% MF 3050 E |
| Wheelbase declared | 88.2 in · 2,240 mm | 93.3 in · 2,371 mm | +6% MF 3050 E |
| Length declared | 142.5 in · 3,620 mm | 155.5 in · 3,950 mm | +9% MF 3050 E |
| Width declared | — | 78.3 in · 1,990 mm | — |
| Ground clearance declared | — | 14.6 in · 370 mm | — |
| Turning radius, braked declared | 11.2 ft · 3.42 m | — | — |
| Fuel tank declared | 64.5 qt · 61.0 L | 156.4 qt · 148.0 L | +143% MF 3050 E |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 184 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 184”
- Source: Traktorenlexikon, “Massey Ferguson MF 168 & MF 168A”
Massey Ferguson MF 3050 E sources
- Source: Traktorenlexikon, “Massey Ferguson MF 3050E”
- Source: Traktorenlexikon, “Massey Ferguson MF 3050”