7 material differences · fewer than 12
Tractor oneMassey Ferguson MF 1581972–1976No measured PTO figureTractor twoURSUS C-3601976–1994No measured PTO figure
Which should you choose?
Read our verdict on the MF 158 and the C-360 → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
7 material differences · 6 fields identical or within 5%, which is not counted as material
| Field | MF 158 | C-360 | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 55.3 hp | 51.2 hp | +8% MF 158 |
| Engine declared | Perkins AD 4.203 | URSUS/ZM S-4003 | differs |
| Displacement declared | 3.34 L | 3.12 L | +7% MF 158 |
| Maximum torque declared | 141 lb·ft · 191 N·m | 140 lb·ft · 190 N·m | — |
| Transmission | |||
| Top speed declared | 12.4 mph · 20 km/h | 15.5 mph · 25 km/h | +25% C-360 |
| Clutch declared | Pedal operated dry and air-cooled MF double clutch | — | — |
| Hydraulics & hitch | |||
| Pump flow declared | 4.0 gpm · 15.1 L/min | 6.9 gpm · 26.3 L/min | +74% C-360 |
| Pressure declared | 2,930 psi · 202 bar | — | — |
| Rear PTO speeds declared | 1146 | 540 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 5,423 lb · 2,460 kg | 4,784 lb · 2,170 kg | +13% MF 158 |
| Maximum permissible mass declared | 8,378 lb · 3,800 kg | — | — |
| Wheelbase declared | 84.3 in · 2,140 mm | 83.7 in · 2,125 mm | — |
| Length declared | 138.2 in · 3,510 mm | 140.6 in · 3,571 mm | — |
| Width declared | 73.6 in · 1,870 mm | 70.9 in · 1,800 mm | — |
| Ground clearance declared | 15.4 in · 390 mm | 15.6 in · 395 mm | — |
| Turning radius, braked declared | 9.9 ft · 3.03 m | 11.1 ft · 3.37 m | +11% C-360 |
| Fuel tank declared | 72.1 qt · 68.2 L | 74.0 qt · 70.0 L | — |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 158 sources
- Source: Traktorenlexikon, “Massey Ferguson MF 158”
- Source: Traktorenlexikon, “Eicher 3354 Mammut 74 A”
- Source: Traktorenlexikon, “Massey Ferguson MF 158 S”
URSUS C-360 sources
- Source: Traktorenlexikon, “Ursus C-360”