9 material differences · fewer than 12

Tractor oneMassey Ferguson MF 15001971–1975No measured PTO figureTractor twoWHITE 2-1801978–1982No measured PTO figure

Which should you choose?

We will not advise between these two machines, because the drive differs (4WD; Two-wheel or four-wheel drive); they were not built in overlapping years (1971–1975; 1978–1982). The figures below are side by side so you can judge them yourself; each says whether it was measured, claimed or declared by its source.

Field by field

9 material differences · 4 fields identical or within 5%, which is not counted as material

Massey Ferguson MF 1500 and WHITE 2-180, field by field
FieldMF 15002-180Gap
Engine
Engine power, claimed claimed182.6 hp179.6 hp—
Engine declaredCaterpillar 3150-V8CATERPILLAR 3208/V-8differs
Displacement declared9.39 L10.43 L+11% 2-180
Maximum torque declared386 lb·ft · 524 N·m483 lb·ft · 655 N·m+25% 2-180
Transmission
Top speed declared18.6 mph · 30 km/h18.6 mph · 30 km/h—
Clutch declaredPedal-operated dry Borg & Beck single-disc clutchPedal-operated dry single-disc clutchdiffers
Hydraulics & hitch
Hydraulic centre declared—Closed centre—
Pump flow declared25.0 gpm · 94.6 L/min22.0 gpm · 83.3 L/min+14% MF 1500
Rear PTO speeds declared1000 rpm1000 rpm—
Weight & dimensions
Unladen weight declared15,873 lb · 7,200 kg18,281 lb · 8,292 kg+15% 2-180
Maximum permissible mass declared18,519 lb · 8,400 kg——
Wheelbase declared119.7 in · 3,040 mm112.0 in · 2,845 mm+7% MF 1500
Length declared223.6 in · 5,680 mm168.0 in · 4,267 mm+33% MF 1500
Width declared98.4 in · 2,500 mm96.0 in · 2,438 mm—
Ground clearance declared15.0 in · 380 mm23.0 in · 584 mm+54% 2-180
Turning radius, braked declared—12.7 ft · 3.89 m—
Fuel tank declared479.7 qt · 454 L——

Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.

Massey Ferguson MF 1500 sources

Source
  • Source: Traktorenlexikon, “Massey Ferguson MF 1500”

WHITE 2-180 sources

Source
  • Source: Traktorenlexikon, “White 2-180”