Massey Ferguson MF 135 (Massey Ferguson) or SAME Atlanta-V (DT)?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 135 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Atlanta-V (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

  • The Massey Ferguson 135 suits loader and hydraulic implement work better on this data: 53% (6.4 L/min / 1.7 gpm) more hydraulic flow.
  • The SAME Atlanta-V (DT) suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.
  • The Massey Ferguson 135 suits road haulage better on this data: 40% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 135 (Massey Ferguson) and SAME Atlanta-V (DT), with the call on each
QuestionMF 135Atlanta-V (DT)Call
Which puts more power through the PTO shaft?30.9 kW (41.4 hp)Traktorenlexikon, “Massey Ferguson MF 135”30.9 kW (41.4 hp)Traktorenlexikon, “SAME Atlanta V (DT)”Not comparableNot comparable on power at the PTO shaft: the MF 135 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Atlanta-V (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 135 and the Atlanta-V (DT).
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the MF 135 and the Atlanta-V (DT).
Which pumps more oil for implements?18.4 L/min (4.9 gpm)Traktorenlexikon, “Massey Ferguson MF 135”12.0 L/min (3.2 gpm)Traktorenlexikon, “SAME Atlanta V (DT)”AheadThe Massey Ferguson 135 has 53% more hydraulic flow (6.4 L/min / 1.7 gpm) than the SAME Atlanta-V (DT) (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,300 kg (2,866 lb)Traktorenlexikon, “Massey Ferguson MF 135”—No figureNo call on three-point lift: no figure on record for the Atlanta-V (DT).
Which is heavier, for traction?1,705 kg (3,759 lb)Traktorenlexikon, “Massey Ferguson MF 135”1,580 kg (3,483 lb)Traktorenlexikon, “SAME Atlanta V (DT)”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?——No figureNo call on maximum permissible mass: no figure on record for the MF 135 and the Atlanta-V (DT).
Which has the wider choice of gears?6 to 8Traktorenlexikon, “Massey Ferguson MF 135”6 to 9Traktorenlexikon, “SAME Atlanta V (DT)”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?——No figureNo call on a creeper range: not stated for the MF 135 and the Atlanta-V (DT).
Which is faster on the road?35 km/h (21.7 mph)Traktorenlexikon, “Massey Ferguson MF 135”25 km/h (15.5 mph)Traktorenlexikon, “SAME Atlanta V (DT)”AheadThe Massey Ferguson 135 has 40% more top speed (10.0 km/h / 6.2 mph) than the SAME Atlanta-V (DT) (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Massey Ferguson MF 135”540 rpmTraktorenlexikon, “SAME Atlanta V (DT)”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 135”independentTraktorenlexikon, “SAME Atlanta V (DT)”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?2WDTraktorenlexikon, “Massey Ferguson MF 135”Two-wheel or four-wheel driveTraktorenlexikon, “SAME Atlanta V (DT)”AheadThe SAME Atlanta-V (DT) is available with four-wheel drive; the Massey Ferguson 135 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1964–19781965–1968EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson 135 has 53% more hydraulic flow (6.4 L/min / 1.7 gpm) than the SAME Atlanta-V (DT) (both pump flow, as stated by the source).
  • The Massey Ferguson 135 has 40% more top speed (10.0 km/h / 6.2 mph) than the SAME Atlanta-V (DT) (both top speed forward, as stated by the source).
  • The SAME Atlanta-V (DT) is available with four-wheel drive; the Massey Ferguson 135 is two-wheel drive (as stated by the sources).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • Even on PTO independence: every PTO is independent.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the MF 135 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the Atlanta-V (DT) has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and a creeper range.

← Every figure for both machines, side by side, with sources