Massey Ferguson MF 132 S-A or Massey Ferguson MF 350?

Which should you choose?

On performance, every comparable figure that differs favours the Massey Ferguson MF 350: hydraulic flow and three-point lift. It is also ahead on top speed. On features, the Massey Ferguson MF 132 S-A is ahead on drive.

  • The Massey Ferguson MF 350 suits loader and hydraulic implement work better on this data: 24% (3.7 L/min / 1.0 gpm) more hydraulic flow and 23% (350 kg / 772 lb) more three-point lift.
  • The Massey Ferguson MF 350 suits road haulage better on this data: 50% (10.0 km/h / 6.2 mph) more top speed.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 132 S-A and Massey Ferguson MF 350, with the call on each
QuestionMF 132 S-AMF 350Call
Which puts more power through the PTO shaft?22.1 kW (29.6 hp)Traktorenlexikon, “Massey Ferguson MF 132 S-A”22.9 kW (30.8 hp)Traktorenlexikon, “Massey Ferguson MF 350”EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
Which turns a litre of fuel into more work at the shaft?No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 132 S-A and the MF 350.
Which pulls harder at the drawbar?No figureNo call on drawbar power: no figure on record for the MF 132 S-A and the MF 350.
Which pumps more oil for implements?15.3 L/min (4.0 gpm)Traktorenlexikon, “Massey Ferguson MF 132 S-A”19.0 L/min (5.0 gpm)Traktorenlexikon, “Massey Ferguson MF 350”AheadThe Massey Ferguson MF 350 has 24% more hydraulic flow (3.7 L/min / 1.0 gpm) than the Massey Ferguson MF 132 S-A (both pump flow, as stated by the source).
Which lifts more on the three-point hitch?1,500 kg (3,307 lb)Traktorenlexikon, “Massey Ferguson MF 132 S-A”1,850 kg (4,079 lb)Traktorenlexikon, “Massey Ferguson MF 350”AheadThe Massey Ferguson MF 350 has 23% more lift (350 kg / 772 lb) than the Massey Ferguson MF 132 S-A (both lift at the hitch ends, as stated by the source).
Which is heavier, for traction?1,290 kg (2,844 lb)Traktorenlexikon, “Massey Ferguson MF 132 S-A”2,629 kg (5,796 lb)Traktorenlexikon, “Massey Ferguson MF 350”Ahead (a fact, not an advantage)The Massey Ferguson MF 350 is 104% heavier (1,339 kg / 2,952 lb) than the Massey Ferguson MF 132 S-A (both unladen weight, as stated by the source).
Which may carry more ballast and load?2,500 kg (5,512 lb)Traktorenlexikon, “Massey Ferguson MF 132 S-A”No figureNo call on maximum permissible mass: no figure on record for the MF 350.
Which has the wider choice of gears?6 to 11Traktorenlexikon, “Massey Ferguson MF 132 S-A”8 to 12Traktorenlexikon, “Massey Ferguson MF 350”EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers a creeper range?No figureNo call on a creeper range: not stated for the MF 132 S-A and the MF 350.
Which is faster on the road?20 km/h (12.4 mph)Traktorenlexikon, “Massey Ferguson MF 132 S-A”30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 350”AheadThe Massey Ferguson MF 350 has 50% more top speed (10.0 km/h / 6.2 mph) than the Massey Ferguson MF 132 S-A (both top speed forward, as stated by the source).
Which offers more PTO speeds?540 rpmTraktorenlexikon, “Massey Ferguson MF 132 S-A”540/1789 rpmTraktorenlexikon, “Massey Ferguson MF 350”EvenEven on PTO speeds: the same speeds (540 rpm).
Which PTO runs independently of the ground drive?No figureNo call on PTO independence: not stated for the MF 132 S-A and the MF 350.
Which drives on both axles?2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 132 S-A”2WDTraktorenlexikon, “Massey Ferguson MF 350”AheadThe Massey Ferguson MF 132 S-A is available with four-wheel drive; the Massey Ferguson MF 350 is two-wheel drive (as stated by the sources).
Which is newer, and what about parts?1974–19791987–1994Ahead (a fact, not an advantage)The Massey Ferguson MF 350 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Massey Ferguson MF 350 has 24% more hydraulic flow (3.7 L/min / 1.0 gpm) than the Massey Ferguson MF 132 S-A (both pump flow, as stated by the source).
  • The Massey Ferguson MF 350 has 23% more lift (350 kg / 772 lb) than the Massey Ferguson MF 132 S-A (both lift at the hitch ends, as stated by the source).
  • The Massey Ferguson MF 350 is 104% heavier (1,339 kg / 2,952 lb) than the Massey Ferguson MF 132 S-A (both unladen weight, as stated by the source).
  • The Massey Ferguson MF 350 has 50% more top speed (10.0 km/h / 6.2 mph) than the Massey Ferguson MF 132 S-A (both top speed forward, as stated by the source).
  • The Massey Ferguson MF 132 S-A is available with four-wheel drive; the Massey Ferguson MF 350 is two-wheel drive (as stated by the sources).
  • The Massey Ferguson MF 350 is newer: production began 13 years later. We hold no parts-availability data, so there is no call on parts.
  • Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
  • Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO speeds: the same speeds (540 rpm).
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.

← Every figure for both machines, side by side, with sources