Massey Ferguson MF 1134 (A) or VALMET 2005-4?
Which should you choose?
On performance, every comparable figure that differs favours the Massey Ferguson MF 1134 (A): three-point lift. On features, the VALMET 2005-4 is ahead on forward gears and top speed.
- The Massey Ferguson MF 1134 (A) suits loader and hydraulic implement work better on this data: 14% (680 kg / 1,499 lb) more three-point lift.
- The VALMET 2005-4 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MF 1134 (A) | 2005-4 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 96.6 kW (129.5 hp)Traktorenlexikon, “Massey Ferguson MF 1134” | 95.8 kW (128.5 hp)Traktorenlexikon, “Valmet 2005” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 1134 (A) and the 2005-4. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MF 1134 (A) and the 2005-4. |
| Which pumps more oil for implements? | 58.5 L/min (15.5 gpm)Traktorenlexikon, “Massey Ferguson MF 1134” | 62.6 L/min (16.5 gpm)Traktorenlexikon, “Valmet 2005” | EvenEven on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which lifts more on the three-point hitch? | 5,400 kg (11,905 lb)Traktorenlexikon, “Massey Ferguson MF 1134” | 4,720 kg (10,406 lb)Traktorenlexikon, “Valmet 2005” | AheadThe Massey Ferguson MF 1134 (A) has 14% more lift (680 kg / 1,499 lb) than the VALMET 2005-4 (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 5,050 kg (11,133 lb)Traktorenlexikon, “Massey Ferguson MF 1134” | 6,335 kg (13,966 lb)Traktorenlexikon, “Valmet 2005” | Ahead (a fact, not an advantage)The VALMET 2005-4 is 25% heavier (1,285 kg / 2,833 lb) than the Massey Ferguson MF 1134 (A) (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | — | — | No figureNo call on maximum permissible mass: no figure on record for the MF 1134 (A) and the 2005-4. |
| Which has the wider choice of gears? | 12Traktorenlexikon, “Massey Ferguson MF 1134” | 16Traktorenlexikon, “Valmet 2005” | AheadThe VALMET 2005-4 has 33% more forward gears (4 gears) than the Massey Ferguson MF 1134 (A) (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the MF 1134 (A) and the 2005-4. |
| Which is faster on the road? | 25 km/h (15.5 mph)Traktorenlexikon, “Massey Ferguson MF 1134” | 30 km/h (18.6 mph)Traktorenlexikon, “Valmet 2005” | AheadThe VALMET 2005-4 has 20% more top speed (5.0 km/h / 3.1 mph) than the Massey Ferguson MF 1134 (A) (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 1134” | 540/1000 rpmTraktorenlexikon, “Valmet 2005” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Massey Ferguson MF 1134” | — | No figureNo call on PTO independence: not stated for the 2005-4. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 1134” | 4WDTraktorenlexikon, “Valmet 2005” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1978–1990 | 1986–1987 | Ahead (a fact, not an advantage)The VALMET 2005-4 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 1134 (A) has 14% more lift (680 kg / 1,499 lb) than the VALMET 2005-4 (both lift at the hitch ends, as stated by the source).
- The VALMET 2005-4 is 25% heavier (1,285 kg / 2,833 lb) than the Massey Ferguson MF 1134 (A) (both unladen weight, as stated by the source).
- The VALMET 2005-4 has 33% more forward gears (4 gears) than the Massey Ferguson MF 1134 (A) (both forward gears, as stated by the source).
- The VALMET 2005-4 has 20% more top speed (5.0 km/h / 3.1 mph) than the Massey Ferguson MF 1134 (A) (both top speed forward, as stated by the source).
- The VALMET 2005-4 is newer: production began 8 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on hydraulic flow (both pump flow, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources