11 material differences · fewer than 12
Tractor oneMassey Ferguson MF 1134 (A)1978–1990No measured PTO figureTractor twoSOMECA 1380 (TD)1979–1983No measured PTO figure
Which should you choose?
Read our verdict on the MF 1134 (A) and the 1380 (TD) → It is generated from the rows below by a fixed, versioned rule set, and names the figure behind every call.
Field by field
11 material differences · 4 fields identical or within 5%, which is not counted as material
| Field | MF 1134 (A) | 1380 (TD) | Gap |
|---|---|---|---|
| Engine | |||
| Engine power, claimed claimed | 133.3 hp | 133.2 hp | — |
| Engine declared | Perkins AT 6.354.4 | FIAT-IVECO 8065.24.000 | differs |
| Displacement declared | 5.80 L | 5.50 L | +5% MF 1134 (A) |
| Maximum torque declared | 344 lb·ft · 466 N·m | 347 lb·ft · 470 N·m | — |
| Transmission | |||
| Top speed declared | 15.5 mph · 25 km/h | 15.5–18.6 mph · 25–30 km/h | differs |
| Clutch declared | Pedal-operated dry Luk double clutch with 330 mm diameter | Pedal operated Ferodo or LuK single-disc clutch | differs |
| Hydraulics & hitch | |||
| Pump flow declared | 15.5 gpm · 58.5 L/min | 14.1 gpm · 53.5 L/min | +9% MF 1134 (A) |
| Pressure declared | 2,368 psi · 163.3 bar | 3,263–3,408 psi · 225–235 bar | differs |
| Three-point lift, at the coupling points declared | 11,905 lb · 5,400 kg | 10,878 lb · 4,934 kg | +9% MF 1134 (A) |
| Rear PTO speeds declared | 540/1000 rpm | 1000 rpm | differs |
| Weight & dimensions | |||
| Unladen weight declared | 11,133 lb · 5,050 kg | 10,748 lb · 4,875 kg | — |
| Maximum permissible mass declared | — | 19,070 lb · 8,650 kg | — |
| Wheelbase declared | 111.8 in · 2,840 mm | 108.3 in · 2,750 mm | — |
| Length declared | 185.0 in · 4,700 mm | 162.8 in · 4,135 mm | +14% MF 1134 (A) |
| Width declared | 98.4 in · 2,500 mm | 85.0–108.7 in · 2,160–2,760 mm | differs |
| Ground clearance declared | — | 26.2 in · 665 mm | — |
| Turning radius, braked declared | — | 13.9 ft · 4.25 m | — |
| Fuel tank declared | 206.1 qt · 195.0 L | 295.9 qt · 280.0 L | +44% 1380 (TD) |
Height is not in this table. It is not one measurement: the sources measure it to different points — over the cab on some machines, over the steering wheel or the exhaust on others — and the same tractor measured two ways can differ by most of a metre. It appears here only when both machines' figures carry the point they were measured to and it is the same point, which is not the case for these two. Each machine's own page prints its height as its source gives it.
Massey Ferguson MF 1134 (A) sources
- Source: Traktorenlexikon, “Massey Ferguson MF 1134”
SOMECA 1380 (TD) sources
- Source: Traktorenlexikon, “Someca 1380”
- Source: Traktorenlexikon, “Fiat 1380 (DT)”