Massey Ferguson MF 1132 or OLIVER 2655?
Which should you choose?
On performance, every comparable figure that differs favours the OLIVER 2655: hydraulic flow. It is also ahead on top speed. On features, the Massey Ferguson MF 1132 is ahead on forward gears and PTO speeds.
- The Massey Ferguson MF 1132 suits PTO-driven implements (mowers, balers, pumps) better on this data: offers 540 rpm.
- The OLIVER 2655 suits loader and hydraulic implement work better on this data: 43% (19.3 L/min / 5.1 gpm) more hydraulic flow.
- The OLIVER 2655 suits road haulage better on this data: 27% (8.0 km/h / 5.0 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MF 1132 | 2655 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 94 kW (126 hp)Traktorenlexikon, “Massey Ferguson MF 1132” | 93.5 kW (125.4 hp)Traktorenlexikon, “Oliver 2655” | EvenEven on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 1132 and the 2655. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MF 1132 and the 2655. |
| Which pumps more oil for implements? | 45.0 L/min (11.9 gpm)Traktorenlexikon, “Massey Ferguson MF 1132” | 64.3 L/min (17.0 gpm)Traktorenlexikon, “Oliver 2655” | AheadThe OLIVER 2655 has 43% more hydraulic flow (19.3 L/min / 5.1 gpm) than the Massey Ferguson MF 1132 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 2,800 kg (6,173 lb)Traktorenlexikon, “Massey Ferguson MF 1132” | — | No figureNo call on three-point lift: no figure on record for the 2655. |
| Which is heavier, for traction? | 5,860 kg (12,919 lb)Traktorenlexikon, “Massey Ferguson MF 1132” | 9,004 kg (19,850 lb)Traktorenlexikon, “Oliver 2655” | Ahead (a fact, not an advantage)The OLIVER 2655 is 54% heavier (3,144 kg / 6,931 lb) than the Massey Ferguson MF 1132 (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 7,500 kg (16,535 lb)Traktorenlexikon, “Massey Ferguson MF 1132” | — | No figureNo call on maximum permissible mass: no figure on record for the 2655. |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Massey Ferguson MF 1132” | 10Traktorenlexikon, “Oliver 2655” | AheadThe Massey Ferguson MF 1132 has 60% more forward gears (6 gears) than the OLIVER 2655 (both forward gears, as stated by the source). |
| Which offers a creeper range? | YesTraktorenlexikon, “Massey Ferguson MF 1132” | — | No figureNo call on a creeper range: not stated for the 2655. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 1132” | 38 km/h (23.6 mph)Traktorenlexikon, “Oliver 2655” | AheadThe OLIVER 2655 has 27% more top speed (8.0 km/h / 5.0 mph) than the Massey Ferguson MF 1132 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 1132” | 1000 rpmTraktorenlexikon, “Oliver 2655” | AheadThe Massey Ferguson MF 1132 offers 540 rpm at the PTO, which the OLIVER 2655 does not (as stated by the sources). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Massey Ferguson MF 1132” | — | No figureNo call on PTO independence: not stated for the 2655. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Massey Ferguson MF 1132” | 4WDTraktorenlexikon, “Oliver 2655” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1977–1982 | 1971–1972 | Ahead (a fact, not an advantage)The Massey Ferguson MF 1132 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The OLIVER 2655 has 43% more hydraulic flow (19.3 L/min / 5.1 gpm) than the Massey Ferguson MF 1132 (both pump flow, as stated by the source).
- The OLIVER 2655 is 54% heavier (3,144 kg / 6,931 lb) than the Massey Ferguson MF 1132 (both unladen weight, as stated by the source).
- The Massey Ferguson MF 1132 has 60% more forward gears (6 gears) than the OLIVER 2655 (both forward gears, as stated by the source).
- The OLIVER 2655 has 27% more top speed (8.0 km/h / 5.0 mph) than the Massey Ferguson MF 1132 (both top speed forward, as stated by the source).
- The Massey Ferguson MF 1132 offers 540 rpm at the PTO, which the OLIVER 2655 does not (as stated by the sources).
- The Massey Ferguson MF 1132 is newer: production began 6 years later. We hold no parts-availability data, so there is no call on parts.
- Even on power at the PTO shaft (both power at the PTO, claimed): the difference is under the 10% threshold for claimed figures, too small to call.
- Even on drive: every machine is available with four-wheel drive.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass, a creeper range and PTO independence.
← Every figure for both machines, side by side, with sources