Massey Ferguson MF 1102 or Renault 951?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 1102 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 951 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The Massey Ferguson MF 1102 suits loader and hydraulic implement work better on this data: 22% (7.2 L/min / 1.9 gpm) more hydraulic flow.
- The Massey Ferguson MF 1102 suits heavy draft work (ploughing, cultivating) better on this data: four-wheel drive.
- The Massey Ferguson MF 1102 suits road haulage better on this data: 20% (5.0 km/h / 3.1 mph) more top speed.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MF 1102 | 951 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 69.9 kW (93.7 hp)Traktorenlexikon, “Massey Ferguson MF 1102” | 69.9 kW (93.7 hp)Traktorenlexikon, “Renault 951 R7641” | Not comparableNot comparable on power at the PTO shaft: the MF 1102 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 951 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 1102 and the 951. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MF 1102 and the 951. |
| Which pumps more oil for implements? | 40.0 L/min (10.6 gpm)Traktorenlexikon, “Massey Ferguson MF 1102” | 32.8 L/min (8.7 gpm)Traktorenlexikon, “Renault 951 R7641” | AheadThe Massey Ferguson MF 1102 has 22% more hydraulic flow (7.2 L/min / 1.9 gpm) than the Renault 951 (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | — | 4,100 kg (9,039 lb)Traktorenlexikon, “Renault 951 R7641” | No figureNo call on three-point lift: no figure on record for the MF 1102. |
| Which is heavier, for traction? | 4,200 kg (9,259 lb)Traktorenlexikon, “Massey Ferguson MF 1102” | 4,090 kg (9,017 lb)Traktorenlexikon, “Renault 951 R7641” | EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which may carry more ballast and load? | 6,500 kg (14,330 lb)Traktorenlexikon, “Massey Ferguson MF 1102” | — | No figureNo call on maximum permissible mass: no figure on record for the 951. |
| Which has the wider choice of gears? | 16Traktorenlexikon, “Massey Ferguson MF 1102” | 12 to 16Traktorenlexikon, “Renault 951 R7641” | EvenEven on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers a creeper range? | YesTraktorenlexikon, “Massey Ferguson MF 1102” | YesTraktorenlexikon, “Renault 951 R7641” | EvenEven on a creeper range: every machine offers one. |
| Which is faster on the road? | 30 km/h (18.6 mph)Traktorenlexikon, “Massey Ferguson MF 1102” | 25 km/h (15.5 mph)Traktorenlexikon, “Renault 951 R7641” | AheadThe Massey Ferguson MF 1102 has 20% more top speed (5.0 km/h / 3.1 mph) than the Renault 951 (both top speed forward, as stated by the source). |
| Which offers more PTO speeds? | 540/1000 rpmTraktorenlexikon, “Massey Ferguson MF 1102” | 540/1000 rpmTraktorenlexikon, “Renault 951 R7641” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | — | — | No figureNo call on PTO independence: not stated for the MF 1102 and the 951. |
| Which drives on both axles? | 4WDTraktorenlexikon, “Massey Ferguson MF 1102” | 2WDTraktorenlexikon, “Renault 951 R7641” | AheadThe Massey Ferguson MF 1102 is available with four-wheel drive; the Renault 951 is two-wheel drive (as stated by the sources). |
| Which is newer, and what about parts? | 1970–1976 | 1973–1977 | EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The Massey Ferguson MF 1102 has 22% more hydraulic flow (7.2 L/min / 1.9 gpm) than the Renault 951 (both pump flow, as stated by the source).
- The Massey Ferguson MF 1102 has 20% more top speed (5.0 km/h / 3.1 mph) than the Renault 951 (both top speed forward, as stated by the source).
- The Massey Ferguson MF 1102 is available with four-wheel drive; the Renault 951 is two-wheel drive (as stated by the sources).
- Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on forward gears (both forward gears, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on a creeper range: every machine offers one.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
- Not comparable on power at the PTO shaft: the MF 1102 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 951 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, three-point lift, maximum permissible mass and PTO independence.
← Every figure for both machines, side by side, with sources