Massey Ferguson MF 9240 or Steyr-Case 9250 a?

Which should you choose?

The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 9240 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9250 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.

Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.

What decides it, question by question?

Buyer questions for Massey Ferguson MF 9240 and Steyr-Case 9250 a, with the call on each
QuestionMF 92409250 aCall
Which puts more power through the PTO shaft?176.6 kW (236.8 hp)Traktorenlexikon, “Massey Ferguson MF 9240”175.9 kW (235.9 hp)Traktorenlexikon, “Steyr 9250 a”Not comparableNot comparable on power at the PTO shaft: the MF 9240 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9250 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
Which turns a litre of fuel into more work at the shaft?——No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 9240 and the 9250 a.
Which pulls harder at the drawbar?——No figureNo call on drawbar power: no figure on record for the MF 9240 and the 9250 a.
Which pumps more oil for implements?—112.4 L/min (29.7 gpm)Traktorenlexikon, “Steyr 9250 a”No figureNo call on hydraulic flow: no figure on record for the MF 9240.
Which lifts more on the three-point hitch?6,869 kg (15,144 lb)Traktorenlexikon, “Massey Ferguson MF 9240”5,050 kg (11,133 lb)Traktorenlexikon, “Steyr 9250 a”Not comparableNot comparable on three-point lift: the MF 9240: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 9240”); the 9250 a: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Steyr 9250 a”) — not the same quantity, basis and condition.
Which is heavier, for traction?9,014 kg (19,872 lb)Traktorenlexikon, “Massey Ferguson MF 9240”8,242 kg (18,170 lb)Traktorenlexikon, “Steyr 9250 a”EvenEven on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
Which may carry more ballast and load?12,000 kg (26,455 lb)Traktorenlexikon, “Massey Ferguson MF 9240”11,575 kg (25,519 lb)Traktorenlexikon, “Steyr 9250 a”EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
Which has the wider choice of gears?18Traktorenlexikon, “Massey Ferguson MF 9240”24Traktorenlexikon, “Steyr 9250 a”AheadThe Steyr-Case 9250a has 33% more forward gears (6 gears) than the Massey Ferguson 9240 (both forward gears, as stated by the source).
Which offers a creeper range?—YesTraktorenlexikon, “Steyr 9250 a”No figureNo call on a creeper range: not stated for the MF 9240.
Which is faster on the road?30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 9240”30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Steyr 9250 a”EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
Which offers more PTO speeds?1000 rpmTraktorenlexikon, “Massey Ferguson MF 9240”540/1000 rpmTraktorenlexikon, “Steyr 9250 a”AheadThe Steyr-Case 9250a offers 540 rpm at the PTO, which the Massey Ferguson 9240 does not (as stated by the sources).
Which PTO runs independently of the ground drive?independentTraktorenlexikon, “Massey Ferguson MF 9240”independentTraktorenlexikon, “Steyr 9250 a”EvenEven on PTO independence: every PTO is independent.
Which drives on both axles?4WDTraktorenlexikon, “Massey Ferguson MF 9240”4WDTraktorenlexikon, “Steyr 9250 a”EvenEven on drive: every machine is available with four-wheel drive.
Which is newer, and what about parts?1994–19981997–1999EvenSame era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.

What does this mean in plain words?

  • The Steyr-Case 9250a has 33% more forward gears (6 gears) than the Massey Ferguson 9240 (both forward gears, as stated by the source).
  • The Steyr-Case 9250a offers 540 rpm at the PTO, which the Massey Ferguson 9240 does not (as stated by the sources).
  • Even on weight (both unladen weight, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
  • Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
  • Even on PTO independence: every PTO is independent.
  • Even on drive: every machine is available with four-wheel drive.
  • Same era: production began within 5 years of each other. We hold no parts-availability data, so there is no call on parts.
  • Not comparable on power at the PTO shaft: the MF 9240 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the 9250 a has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
  • Not comparable on three-point lift: the MF 9240: lift at the hitch ends, as stated by the source (Traktorenlexikon, “Massey Ferguson MF 9240”); the 9250 a: lift through the full range at an unstated point, as stated by the source (Traktorenlexikon, “Steyr 9250 a”) — not the same quantity, basis and condition.
  • No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power, hydraulic flow and a creeper range.

← Every figure for both machines, side by side, with sources