Massey Ferguson MF 8150 A or New Holland T 7040?
Which should you choose?
The data can’t decide this. Power at the PTO shaft cannot be compared: the MF 8150 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 7040 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- The New Holland T 7040 suits loader and hydraulic implement work better on this data: 127% (67.7 L/min / 17.9 gpm) more hydraulic flow and 53% (3,007 kg / 6,629 lb) more three-point lift.
Generated by rule set compare@4 from the figures on the side-by-side table, allowed by route “the same stated configuration”. Measured figures are compared only with measured, claimed only with claimed, at the same test condition; differences within each figure’s tolerance are not called.
What decides it, question by question?
| Question | MF 8150 A | T 7040 | Call |
|---|---|---|---|
| Which puts more power through the PTO shaft? | 132.5 kW (177.7 hp)Traktorenlexikon, “Massey Ferguson MF 8150” | 133.9 kW (179.6 hp)Traktorenlexikon, “New Holland T7040 Power Command” | Not comparableNot comparable on power at the PTO shaft: the MF 8150 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 7040 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft. |
| Which turns a litre of fuel into more work at the shaft? | — | — | No figureNo call on fuel efficiency at the shaft: no figure on record for the MF 8150 A and the T 7040. |
| Which pulls harder at the drawbar? | — | — | No figureNo call on drawbar power: no figure on record for the MF 8150 A and the T 7040. |
| Which pumps more oil for implements? | 53.3 L/min (14.1 gpm)Traktorenlexikon, “Massey Ferguson MF 8150” | 121.0 L/min (32.0 gpm)Traktorenlexikon, “New Holland T7040 Power Command” | AheadThe New Holland T 7040 has 127% more hydraulic flow (67.7 L/min / 17.9 gpm) than the Massey Ferguson MF 8150 A (both pump flow, as stated by the source). |
| Which lifts more on the three-point hitch? | 5,640 kg (12,434 lb)Traktorenlexikon, “Massey Ferguson MF 8150” | 8,647 kg (19,063 lb)Traktorenlexikon, “New Holland T7040 Power Command” | AheadThe New Holland T 7040 has 53% more lift (3,007 kg / 6,629 lb) than the Massey Ferguson MF 8150 A (both lift at the hitch ends, as stated by the source). |
| Which is heavier, for traction? | 6,720 kg (14,815 lb)Traktorenlexikon, “Massey Ferguson MF 8150” | 8,055 kg (17,758 lb)Traktorenlexikon, “New Holland T7040 Power Command” | Ahead (a fact, not an advantage)The New Holland T 7040 is 20% heavier (1,335 kg / 2,943 lb) than the Massey Ferguson MF 8150 A (both unladen weight, as stated by the source). |
| Which may carry more ballast and load? | 11,500 kg (25,353 lb)Traktorenlexikon, “Massey Ferguson MF 8150” | 12,000 kg (26,455 lb)Traktorenlexikon, “New Holland T7040 Power Command” | EvenEven on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call. |
| Which has the wider choice of gears? | 32 to 48Traktorenlexikon, “Massey Ferguson MF 8150” | 18 to 19Traktorenlexikon, “New Holland T7040 Power Command” | AheadThe Massey Ferguson MF 8150 A has 68% more forward gears (13 gears) than the New Holland T 7040 (both forward gears, as stated by the source). |
| Which offers a creeper range? | — | — | No figureNo call on a creeper range: not stated for the MF 8150 A and the T 7040. |
| Which is faster on the road? | 30 km/h (18.6 mph) to 40 km/h (24.9 mph)Traktorenlexikon, “Massey Ferguson MF 8150” | 40 km/h (24.9 mph) to 50 km/h (31.1 mph)Traktorenlexikon, “New Holland T7040 Power Command” | EvenEven on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap. |
| Which offers more PTO speeds? | 540/540E/1000 rpmTraktorenlexikon, “Massey Ferguson MF 8150” | 540/540E/1000 rpmTraktorenlexikon, “New Holland T7040 Power Command” | EvenEven on PTO speeds: the same speeds (540, 1000 rpm). |
| Which PTO runs independently of the ground drive? | independentTraktorenlexikon, “Massey Ferguson MF 8150” | independentTraktorenlexikon, “New Holland T7040 Power Command” | EvenEven on PTO independence: every PTO is independent. |
| Which drives on both axles? | 2WD / 4WDTraktorenlexikon, “Massey Ferguson MF 8150” | 4WDTraktorenlexikon, “New Holland T7040 Power Command” | EvenEven on drive: every machine is available with four-wheel drive. |
| Which is newer, and what about parts? | 1995–1999 | 2007–2011 | Ahead (a fact, not an advantage)The New Holland T 7040 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts. |
What does this mean in plain words?
- The New Holland T 7040 has 127% more hydraulic flow (67.7 L/min / 17.9 gpm) than the Massey Ferguson MF 8150 A (both pump flow, as stated by the source).
- The New Holland T 7040 has 53% more lift (3,007 kg / 6,629 lb) than the Massey Ferguson MF 8150 A (both lift at the hitch ends, as stated by the source).
- The New Holland T 7040 is 20% heavier (1,335 kg / 2,943 lb) than the Massey Ferguson MF 8150 A (both unladen weight, as stated by the source).
- The Massey Ferguson MF 8150 A has 68% more forward gears (13 gears) than the New Holland T 7040 (both forward gears, as stated by the source).
- The New Holland T 7040 is newer: production began 12 years later. We hold no parts-availability data, so there is no call on parts.
- Even on maximum permissible mass (both maximum permissible mass, as stated by the source): the difference is under the 10% threshold, too small to call.
- Even on top speed (both top speed forward, as stated by the source): the figures vary by configuration and the ranges overlap.
- Even on PTO speeds: the same speeds (540, 1000 rpm).
- Even on PTO independence: every PTO is independent.
- Even on drive: every machine is available with four-wheel drive.
- Not comparable on power at the PTO shaft: the MF 8150 A has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft; the T 7040 has only engine power (gross or net not stated), claimed — a different quantity from power at the shaft.
- No figure on record for every machine, so no call on: fuel efficiency at the shaft, drawbar power and a creeper range.
← Every figure for both machines, side by side, with sources